B&B Electronics EIR618-2SFP-T manual Commands Level

Commands Level

Modes	Access	Prompt	Exit	About This Mode
	Method		Method
				The user commands
				available at the user
				level are a subset of
	Begin a		Enter	those available at the
User EXEC	session with	switch>	logout or	privileged level.
	your switch.		quit.	Use this mode to
				• Perform basic tests.
				• Display system
				information.
				The privileged
	Enter the			command is the
Privileged	enable		Enter	advanced mode.
	command	switch#	disable to	Use this mode to
EXEC
	while in User		exit.	• Display advanced
	EXEC mode.			function status
				• Save configuration
	Enter the		To exit to	Use this mode to
	configure
			privileged	configure those
Global	command	switch
			EXEC	parameters that are
Configuration	while in	(config)#
			mode, enter	going to be applied to
	privileged
			exit or end	your switch.
	EXEC mode.
	Enter the vlan
	database		To exit to	Use this mode to
VLAN	command	switch	user EXEC	configure
database	while in	(vlan)#	mode, enter	VLAN-specific
	privileged		exit.	parameters.
	EXEC mode.
Interface	Enter the	switch	To exit to	Use this mode to
configuration	interface of	(config-if)#	global	configure parameters

26	Manual Documentation Number: EIR618-2SFP-T_5107m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com