D | Turn the modem back on. If you are using a cable or DSL |
| modem, wait until it synchronizes itself with the modem |
| service. (You’ll know it’s synchronized when the cable |
| modem’s light goes from blinking to steady.) |
E | Plug the Gateway in: Plug one end of its power adapter into |
| the 12VDC power jack on the back of the Gateway and |
| then plug the other end into a wall outlet. The Gateway’s |
| SYS indicator will come ON for about 10 seconds, and |
| then it will flash rapidly a few times. When the indicator |
| flashes continuously once per second, the |
| is complete, and your Gateway is ready. |
F | Note: If you are using a cable modem and your service |
| provider has instructed you to call back with your |
| Gateway’s WAN MAC address, now is the time to do so. |
| Turn your computer back on and restart it. |
10 |