Zoom IG-4160 manual Configuring Your Internet Access Method, Enter

Page 11

2

Configuring Your Internet Access Method

This chapter explains how to configure your Internet access method, or WAN type, which is the next step in the installation process. Note: The Gateway’s default Internet access method is Cable or DSL Modem using a Dynamic IP Address.

Note: If you prefer to set up your Gateway using an interactive online guide, please refer to the accompanying Zoom CD and the Smart Start program.

Now that you have connected your modem and Gateway, you are ready to communicate with the Gateway and configure your WAN type.

1	Launch your Web browser on the Administrator PC, type the
	Gateway’s default IP address—192.168.123.254—and press
	Enter.
2	The Login screen displays. Type the system password in the
	System Password field (default is admin), and click the
	Login button.
	Note: If the Login screen doesn’t display, perform the
	following in this order:
	a	Recheck all connections.
	b	Restart the Gateway.

c Perform a “hard” reset. (See page 44.)

Chapter 2: Configuring Your Internet Access Method

11

Image 11

Contents User Guide IG-4160 Zoom Internet GatewayCopyright 2001 All rights reserved Contents You Will Also Need Package ContentsGetting Started Equipm ENT Configurations Installation Road MapPlan Your Gatew AY Setup 100BaseT Familiarizing Yourself with Your GatewayLink/Act PRE-INSTALLATION Checklist For dial-up and Isdn modems Connecting the PC and the IG-4160For cable and DSL modems Turn the modem back on. If you are using a cable or DSL Enter Configuring Your Internet Access MethodIG-4160 Zoom Internet Gateway User Guide Using a Cable or DSL Modem with a Dynamic IP Address Renew IP Forever Enable Auto-reconnect box ifHost Name OptionalUsing a DSL Modem with a Static IP Address Using a DSL Modem with PPPoE Using a Dial-up or Isdn Modem Dial-up Telephone Number Dial-up Password999=allowed Click Permanent Connection to Default=300 Extra SettingsUsing the Gateway Without WAN Access Connecting the Printer to the Gateway Setting up the Gateway as a Print ServerInstalling the Print Server Software on a Client PC If You Have an Existing Printer Configuring the Print Server FunctionChoose PRTmate All-in-1 IP-Sharer from the Print To… If You Don’t Have an Existing Printer Setting up the Gateway as a Print Server Start Programs Zoom Uninstall Uninstalling the Print ServerModifying Firewall Settings Advanced Setup OptionsSpecifying Special Application Settings Setting the DMZ Host’s IP Address Using a Non-standard FTP Port Configuring the LAN Dhcp Server Configuring a Virtual Server Advanced Setup Options Configuring LAN MAC Addresses Connection Definition Group Members Access Right Definition Configuring the Router Access ControlSample Service Port Number Table Clone WAN MAC Feature Configuring the WAN Ping ResponseClick the Save button Monitoring System Status System AdministrationFirmware Version Change the Administrator’s password Performing System Administration TasksView current System Firmware Version Upgrade NowView System Log Restart Resetting the Gateway to Its Default SettingsSave UndoRegulatory Information AppendixDepartment of Commerce End User Statement Page 3411-A 27248 2001