Zoom IG-4160 manual Connection Definition

1

2

3

4

Open the Gateway’s Advanced Setup screen by clicking the same-named icon at the top of the main interface window, and click the LAN MAC Address Control button. Then check the MAC Access Control Enable box.

Specify which devices you want to be able to connect or associate with the Gateway by checking the accompanying Enable boxes and selecting allow or deny from the dropdown lists.

Define the LAN MAC address and IP address pairs. Use the Prev Page and Next Page buttons to scroll the list of pairs. (The Gateway can hold a maximum of 32 pairs.) Use the DHCP clients dropdown list to find LAN MAC addresses known to the DHCP server. Check the Conn. (connection) boxes for each LAN client. Note: The Assoc. box is not activated on your IG-4160.

Click Save to save your changes (or Undo to start over).

The following table lists what a client can and cannot do when Conn. is enabled or disabled.

Connection	Definition
Connection checked	Full access to the Internet and all
	network resources
Connection not checked	Can communicate with other LAN
	clients, but cannot connect to the
	Internet, use the print server
	function, or communicate with the
	Gateway

Chapter 4: Advanced Setup Options 35