Zoom IG-4160 manual Host Name, Optional, Renew IP Forever, Enable Auto-reconnect box if

Page 14

Host Name

May be required by some service

(Optional)

providers. If so, your service

provider will inform you.

 

 

 

Renew IP Forever

Disabled by default. Check the

 

Enable (Auto-reconnect) box if

 

you want the Gateway to renew

 

the IP address automatically when

 

the IP address lease is about to

 

expire. This option also allows the

 

Gateway to automatically connect

 

to your service provider after the

 

Gateway is restarted or if the

 

connection is interrupted.

 

 

If you change any settings, click Save (and Restart if you are prompted to do so).

Return to the road map on page 6 to review your setup plan.

14

IG-4160 Zoom Internet Gateway User Guide

Image 14
Contents IG-4160 Zoom Internet Gateway User GuideCopyright 2001 All rights reserved Contents You Will Also Need Package ContentsGetting Started Installation Road Map Equipm ENT ConfigurationsPlan Your Gatew AY Setup 100BaseT Familiarizing Yourself with Your GatewayLink/Act PRE-INSTALLATION Checklist For dial-up and Isdn modems Connecting the PC and the IG-4160For cable and DSL modems Turn the modem back on. If you are using a cable or DSL Configuring Your Internet Access Method EnterIG-4160 Zoom Internet Gateway User Guide Using a Cable or DSL Modem with a Dynamic IP Address Optional Enable Auto-reconnect box ifHost Name Renew IP ForeverUsing a DSL Modem with a Static IP Address Using a DSL Modem with PPPoE Using a Dial-up or Isdn Modem Extra Settings Dial-up Password999=allowed Click Permanent Connection to Default=300 Dial-up Telephone NumberUsing the Gateway Without WAN Access Setting up the Gateway as a Print Server Connecting the Printer to the GatewayInstalling the Print Server Software on a Client PC Configuring the Print Server Function If You Have an Existing PrinterChoose PRTmate All-in-1 IP-Sharer from the Print To… If You Don’t Have an Existing Printer Setting up the Gateway as a Print Server Uninstalling the Print Server Start Programs Zoom UninstallAdvanced Setup Options Modifying Firewall SettingsSpecifying Special Application Settings Setting the DMZ Host’s IP Address Using a Non-standard FTP Port Configuring the LAN Dhcp Server Configuring a Virtual Server Advanced Setup Options Configuring LAN MAC Addresses Connection Definition Configuring the Router Access Control Group Members Access Right DefinitionSample Service Port Number Table Configuring the WAN Ping Response Clone WAN MAC FeatureClick the Save button System Administration Monitoring System StatusFirmware Version Performing System Administration Tasks Change the Administrator’s passwordView current System Firmware Version Upgrade NowView System Log Undo Resetting the Gateway to Its Default SettingsSave RestartAppendix Regulatory InformationDepartment of Commerce End User Statement Page 3411-A 27248 2001