D-Link WBR-1310 manual Firewall Settings, Enable Pptp Passthrough Enable L2TP Enable IPSec

Section 3 - Configuration

Firewall Settings

This section will allow you to setup a DMZ host and to enable VPN passthrough.

If you have a client PC that cannot run Internet applications properly from behind the WBR-2310, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort.

Enable DMZ Host:

DMZ IP Address:

Enable PPTP

Passthrough:

Enable L2TP

Passthrough:

Enable IPSec

Passthrough:

Check this box to enable DMZ.

Enter the IP address of the computer you would like to open all ports to.

Check this box to allow PPTP VPN traffic to pass through the router to your VPN client.

Check this box to allow L2TP VPN traffic to pass through the router to your VPN client.

Check this box to allow IPSec VPN traffic to pass through the router to your VPN client.

D-Link WBR-1310 User Manual 32