D-Link WBR-1310 manual L2TP

Section 3 - Configuration

Internet Setup

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username and password. This option is typically used for DSL services.

L2TP:

IP Address: Subnet Mask:

Gateway:

DNS:

Server IP:

L2TP Account: L2TP Password:

Maximum Idle Time:

MTU:

Connect Mode:

Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

Enter the IP address (Static L2TP only).

Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your ISP (Internet Service Provider.)

Enter the Server IP provided by your ISP (optional).

Enter your L2TP account name.

Enter your L2TP password and then retype the password in the next box.

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.

Select either Always-on, Manual, or Connect-on demand.

D-Link WBR-1310 User Manual 22