Advanced Network Settings | D-Link WBR-1310 guide

Section 3 - Configuration

Advanced Network Settings

UPnP Settings: To use the Universal Plug and Play (UPnP™) feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals.

WAN Ping: Unchecking the box will not allow the WBR- 2310 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the WAN port to be “pinged”.

WAN select to You may set the port speed of the WAN port to 10/100 Mbps: 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the

port speed to 10Mbps.

Gaming Mode: Gaming mode allows a form of pass-through for certain Internet Games. If you are using Xbox, Playstation2 or a PC, make sure you are using the latest firmware and Gaming Mode is enabled. To utilize Gaming Mode, click the box. If you are not using a Gaming application, it is recommended that you Disable Gaming Mode.

Multicast Check the box to allow multicast traffic to pass streams: through the router from the Internet.

D-Link WBR-1310 User Manual

34

Image 34

D-Link WBR-1310 manual Advanced Network Settings

Contents

Page Table of Contents Warranty Registration Wireless SecurityTroubleshooting Wireless Basics Networking Basics ProductPackageOverviewContents Introduction Features Connections Hardware OverviewLAN Ports Local Network LEDs Power LEDLEDs Status LED Installation Before you Begin Wireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Configuration Web-based Configuration Utility Setup Wizard Click Launch Internet Connection Setup Wizard to begin Configuration Configuration Configuration Internet Setup Dynamic Cable PPPoE DSL Pptp L2TP Big Pond Static assigned by ISP Wireless Settings Network Settings Dhcp Server Settings Port Forwarding Rules Application Rules Network Filter Configure Website Select Turn Website Filtering OFF, Turn Website Filter Firewall Settings Enable Pptp Passthrough Enable L2TP Enable IPSec Advanced Wireless Settings CTS Mode Advanced Network Settings Administrator Settings IP Address Port Time Settings System Settings Firmware Upgrade System Check Device Information Log Wireless Stats Stats Support Wireless Security What is WEP? Configure WEP Next to Security Mode, select Enable WEP Security What is WPA? Configure WPA-PSK Configure WPA Radius Connect to a Wireless Network Using Windows XP Configure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility? What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network Wlan Home Wireless Personal Area Network WpanSmall Office and Home Office Centralize your router or Access Point Eliminate Interference Wireless Modes Security Networking Basics Check your IP address Step Step Highlight Internet Protocol TCP/IP and click Properties Technical Specifications Standards Warranty Phone Support Contacting Technical SupportInternet Support Warranty Limited Warranty Limited Software Warranty Non-Applicability of Warranty What Is Not Covered Disclaimer of Other Warranties Trademarks Limitation of LiabilityGoverning Law Copyright Statement Federal Communication Commission Interference Statement CE Mark WarningFCC Caution Industry Canada Statement Registration