D-Link WBR-1310 manual Pptp

Section 3 - Configuration

Internet Setup

PPTP

Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.

PPTP:

IP Address: Subnet Mask:

Gateway:

DNS:

Server IP:

PPTP Account: PPTP Password:

Maximum Idle Time:

MTU:

Connect Mode:

Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server

Addresses (Static PPTP only).

Enter the Gateway IP Address provided by your ISP.

The DNS server information will be supplied by your

ISP (Internet Service Provider.)

Enter the Server IP provided by your ISP (optional).

Enter your PPTP account name.

Enter your PPTP password and then retype the password in the next box.

Enter a maximum idle time during which the Internet

connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.

Select either Always-on, Manual, or Connect-on demand.

D-Link WBR-1310 User Manual 21