Section 3 - Configuration
Network Filter
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
Configure MAC Select Disable MAC filters, allow MAC addresses
Filter: listed below, or deny MAC addresses listed
below.
MAC Address: Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual.
DHCP Client: Select a DHCP client from the
30 |
