Firmware Upgrade | D-Link WBR-1310 specs

Section 3 - Configuration

Firmware Upgrade

You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.ca. You can download firmware upgrades to your hard drive from the D-Link support site.

Firmware Click on the link in this screen to find out if there Upgrade: is an updated firmware; if so, download the new

firmware to your hard drive.

Browse: After you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. Click Save Settings to complete the firmware upgrade.

D-Link WBR-1310 User Manual

38

Image 38

D-Link WBR-1310 manual Firmware Upgrade

Contents

Page Table of Contents Warranty Registration Wireless SecurityTroubleshooting Wireless Basics Networking Basics ProductPackageOverviewContents Introduction Features LAN Ports Hardware OverviewConnections Local Network LEDs Power LEDLEDs Status LED Installation Before you Begin Wireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Configuration Web-based Configuration Utility Setup Wizard Click Launch Internet Connection Setup Wizard to begin Configuration Configuration Configuration Internet Setup Dynamic Cable PPPoE DSL Pptp L2TP Big Pond Static assigned by ISP Wireless Settings Network Settings Dhcp Server Settings Port Forwarding Rules Application Rules Network Filter Configure Website Select Turn Website Filtering OFF, Turn Website Filter Firewall Settings Enable Pptp Passthrough Enable L2TP Enable IPSec Advanced Wireless Settings CTS Mode Advanced Network Settings Administrator Settings IP Address Port Time Settings System Settings Firmware Upgrade System Check Device Information Log Wireless Stats Stats Support Wireless Security What is WEP? Configure WEP Next to Security Mode, select Enable WEP Security What is WPA? Configure WPA-PSK Configure WPA Radius Connect to a Wireless Network Using Windows XP Configure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility? What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network Wlan Small Office and Home Office Wireless Personal Area Network WpanHome Centralize your router or Access Point Eliminate Interference Wireless Modes Security Networking Basics Check your IP address Step Step Highlight Internet Protocol TCP/IP and click Properties Technical Specifications Standards Warranty Internet Support Contacting Technical SupportPhone Support Warranty Limited Warranty Limited Software Warranty Non-Applicability of Warranty What Is Not Covered Disclaimer of Other Warranties Trademarks Limitation of LiabilityGoverning Law Copyright Statement FCC Caution CE Mark WarningFederal Communication Commission Interference Statement Industry Canada Statement Registration