Zoom IG-4160 manual Installing the Print Server Software on a Client PC

Page 21

3.2Installing the Print Server Software on a Client PC

You must install the print server software on each PC that will share the printer connected to the Gateway. Follow these steps.

1 Insert the Zoom CD-ROM into your computer’s CD-ROM drive. The following dialog box should display automatically. If it doesn’t, double-click the setup.exe icon in the CD-ROM’s folder.

2 Click the Zoom Software button.

3 Click the Install Print Server button. The installation will proceed.

4 When the Welcome dialog box displays, click the Next button.

5 Select the destination folder and click Next. The setup program will install the Print Server in the destination folder.

6 When prompted, click Finish.

7 When prompted, select the entry, Yes, I want to restart my computer now, and click OK. Once you restart your computer, the software installation is complete.

The final stage is to configure the print server function.

Chapter 3: Setting up the Gateway as a Print Server

21

Image 21

Contents User Guide IG-4160 Zoom Internet GatewayCopyright 2001 All rights reserved Contents Package Contents Getting StartedYou Will Also Need Equipm ENT Configurations Installation Road MapPlan Your Gatew AY Setup Familiarizing Yourself with Your Gateway Link/Act100BaseT PRE-INSTALLATION Checklist Connecting the PC and the IG-4160 For cable and DSL modemsFor dial-up and Isdn modems Turn the modem back on. If you are using a cable or DSL Enter Configuring Your Internet Access MethodIG-4160 Zoom Internet Gateway User Guide Using a Cable or DSL Modem with a Dynamic IP Address Host Name Enable Auto-reconnect box ifOptional Renew IP ForeverUsing a DSL Modem with a Static IP Address Using a DSL Modem with PPPoE Using a Dial-up or Isdn Modem 999=allowed Click Permanent Connection to Default=300 Dial-up PasswordExtra Settings Dial-up Telephone NumberUsing the Gateway Without WAN Access Connecting the Printer to the Gateway Setting up the Gateway as a Print ServerInstalling the Print Server Software on a Client PC If You Have an Existing Printer Configuring the Print Server FunctionChoose PRTmate All-in-1 IP-Sharer from the Print To… If You Don’t Have an Existing Printer Setting up the Gateway as a Print Server Start Programs Zoom Uninstall Uninstalling the Print ServerModifying Firewall Settings Advanced Setup OptionsSpecifying Special Application Settings Setting the DMZ Host’s IP Address Using a Non-standard FTP Port Configuring the LAN Dhcp Server Configuring a Virtual Server Advanced Setup Options Configuring LAN MAC Addresses Connection Definition Group Members Access Right Definition Configuring the Router Access ControlSample Service Port Number Table Clone WAN MAC Feature Configuring the WAN Ping ResponseClick the Save button Monitoring System Status System AdministrationFirmware Version Change the Administrator’s password Performing System Administration TasksUpgrade Now View System LogView current System Firmware Version Save Resetting the Gateway to Its Default SettingsUndo RestartRegulatory Information AppendixDepartment of Commerce End User Statement Page 3411-A 27248 2001