In addition to Cable Modem or DSL Modem (Dynamic IP Address) (see below), your choices are as follows:
•DSL Modem with Static IP Address (turn to page 15)
•DSL Modem with PPPoE (turn to page 16)
•
•No WAN Internet Access (turn to page 19).
To change your WAN type, select the correct button, then click View/Configure WAN Settings.
2.1Using a Cable or DSL Modem with a Dynamic IP Address
•The Gateway’s default Internet access method is Cable or DSL Modem with a Dynamic IP Address.
•If this is your Internet access method, you don’t necessarily have to make any changes. To review your settings, click View/Configure WAN Settings from the Gateway’s Basic Setup screen.
Chapter 2: Configuring Your Internet Access Method | 13 |