Zoom IG-4160 manual Using a DSL Modem with a Static IP Address

Page 15

2.2Using a DSL Modem with a Static IP Address

•From the Gateway’s Basic Setup screen, select the DSL Modem (Static IP Address) button and then click View/Configure WAN Settings. A screen displays with several fields to fill in.

WAN IP Address	Type the IP address your service provider has
	given you.

WAN Subnet Mask	Type the mask your service provider has
	given you.
WAN Gateway	Type your service provider’s Gateway IP
	address. Assigned by your service provider.

Primary DNS*	Domain Name Server IP address. Assigned
	by your service provider.

Secondary DNS*	Backup Domain Name Server IP address.
	Assigned by your service provider.

*Primary and Secondary DNS addresses are the addresses of the initial server and the backup server assigned to request a Web-name-to-IP- address lookup, respectively. Note: If you set these addresses as 0.0.0.0, they will be automatically assigned.

•Once you have filled in all the information, click Save (and Restart if you are prompted to do so).

Return to the road map on page 6 to review your setup plan.

Chapter 2: Configuring Your Internet Access Method

15

Image 15

Contents User Guide IG-4160 Zoom Internet GatewayCopyright 2001 All rights reserved Contents Package Contents Getting StartedYou Will Also Need Equipm ENT Configurations Installation Road MapPlan Your Gatew AY Setup Familiarizing Yourself with Your Gateway Link/Act100BaseT PRE-INSTALLATION Checklist Connecting the PC and the IG-4160 For cable and DSL modemsFor dial-up and Isdn modems Turn the modem back on. If you are using a cable or DSL Enter Configuring Your Internet Access MethodIG-4160 Zoom Internet Gateway User Guide Using a Cable or DSL Modem with a Dynamic IP Address Renew IP Forever Enable Auto-reconnect box ifHost Name OptionalUsing a DSL Modem with a Static IP Address Using a DSL Modem with PPPoE Using a Dial-up or Isdn Modem Dial-up Telephone Number Dial-up Password999=allowed Click Permanent Connection to Default=300 Extra SettingsUsing the Gateway Without WAN Access Connecting the Printer to the Gateway Setting up the Gateway as a Print ServerInstalling the Print Server Software on a Client PC If You Have an Existing Printer Configuring the Print Server FunctionChoose PRTmate All-in-1 IP-Sharer from the Print To… If You Don’t Have an Existing Printer Setting up the Gateway as a Print Server Start Programs Zoom Uninstall Uninstalling the Print ServerModifying Firewall Settings Advanced Setup OptionsSpecifying Special Application Settings Setting the DMZ Host’s IP Address Using a Non-standard FTP Port Configuring the LAN Dhcp Server Configuring a Virtual Server Advanced Setup Options Configuring LAN MAC Addresses Connection Definition Group Members Access Right Definition Configuring the Router Access ControlSample Service Port Number Table Clone WAN MAC Feature Configuring the WAN Ping ResponseClick the Save button Monitoring System Status System AdministrationFirmware Version Change the Administrator’s password Performing System Administration TasksUpgrade Now View System LogView current System Firmware Version Restart Resetting the Gateway to Its Default SettingsSave UndoRegulatory Information AppendixDepartment of Commerce End User Statement Page 3411-A 27248 2001