Zoom IG-4160 manual If You Don’t Have an Existing Printer

Page 24

5

6

Click the Port Settings or Configure Port button. You will be prompted to type the Gateway’s LAN IP address. Type it in (the default is 192.168.123.254), and click OK.

If prompted again, click OK or Finish. That’s it. Now your Print Server is ready.

If You Don’t Have an Existing Printer

If you want to configure your Gateway’s Print Server function, but don’t have a printer installed yet, follow the instructions below.

Note: The illustrations here are representative. Depending on your PC’s operating system, your printer dialog boxes may look slightly different.

1 From the PC’s desktop, click Start Setting Printers, and double-click Add Printer to display the Add Printer Wizard dialog box. Click Next.

2 The following dialog box displays. You must select Local Printer. Then click Next.

24	IG-4160 Zoom Internet Gateway User Guide

Image 24

Contents IG-4160 Zoom Internet Gateway User GuideCopyright 2001 All rights reserved Contents Package Contents Getting StartedYou Will Also Need Installation Road Map Equipm ENT ConfigurationsPlan Your Gatew AY Setup Familiarizing Yourself with Your Gateway Link/Act100BaseT PRE-INSTALLATION Checklist Connecting the PC and the IG-4160 For cable and DSL modemsFor dial-up and Isdn modems Turn the modem back on. If you are using a cable or DSL Configuring Your Internet Access Method EnterIG-4160 Zoom Internet Gateway User Guide Using a Cable or DSL Modem with a Dynamic IP Address Enable Auto-reconnect box if Host NameOptional Renew IP ForeverUsing a DSL Modem with a Static IP Address Using a DSL Modem with PPPoE Using a Dial-up or Isdn Modem Dial-up Password 999=allowed Click Permanent Connection to Default=300Extra Settings Dial-up Telephone NumberUsing the Gateway Without WAN Access Setting up the Gateway as a Print Server Connecting the Printer to the GatewayInstalling the Print Server Software on a Client PC Configuring the Print Server Function If You Have an Existing PrinterChoose PRTmate All-in-1 IP-Sharer from the Print To… If You Don’t Have an Existing Printer Setting up the Gateway as a Print Server Uninstalling the Print Server Start Programs Zoom UninstallAdvanced Setup Options Modifying Firewall SettingsSpecifying Special Application Settings Setting the DMZ Host’s IP Address Using a Non-standard FTP Port Configuring the LAN Dhcp Server Configuring a Virtual Server Advanced Setup Options Configuring LAN MAC Addresses Connection Definition Configuring the Router Access Control Group Members Access Right DefinitionSample Service Port Number Table Configuring the WAN Ping Response Clone WAN MAC FeatureClick the Save button System Administration Monitoring System StatusFirmware Version Performing System Administration Tasks Change the Administrator’s passwordUpgrade Now View System LogView current System Firmware Version Resetting the Gateway to Its Default Settings SaveUndo RestartAppendix Regulatory InformationDepartment of Commerce End User Statement Page 3411-A 27248 2001