Changing frame settings

Automatically upgrade firmware from the Internet

When the frame is connected to your wireless network, you can automatically upgrade the firmware from the Internet whenever a new version is available.

A message appears on your frame when a new firmware version is detected from the Internet.

Upgrade right away

Install now—Select, then press OK to start the upgrade.

When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the power switch on the frame to Off, then back to On.

IMPORTANT: Do not turn off the frame during the upgrade!

Upgrade later

Remind me later—Select, then press OK.

The upgrade message disappears, then appears again the next time you turn on the frame.

No thanks—Select, then press OK.

The upgrade message disappears. To change your mind and upgrade to this version, see Manually upgrade firmware, page 22.

A new message appears when the next firmware version is available.

www.kodak.com/go/support

23

Page 29
Image 29
Kodak EX1011 Automatically upgrade firmware from the Internet, Install now-Select, then press OK to start the upgrade