Kodak EX1011, EX811 manual Picture transfer software-copying wirelessly, Copying to your computer

Using wireless mode

Picture transfer software—copying wirelessly

Kodak picture transfer software (included on the software CD packaged with your EX model frame) lets you wirelessly copy pictures and videos from the frame to your computer. Make sure you install the software before you proceed (see the Wireless Setup Guide).

Copying to your computer

1On the frame, display a picture in single view (see page 10), then press . To copy multiple pictures/videos, see page 17.

2Press to highlight Copy, then press OK.

3Press to highlight Network Computer , then press OK.

If this is the first time you are copying to your computer, you must first “allow” the frame to communicate with your computer.

4A Kodak picture transfer software message opens

on your computer screen. Click the message to open the Allow screen.

5Click Allow.

6Return to the frame and recopy the picture.

If you did not see the message (from step 4 above) and you cannot copy files, see Allow the frame on your computer, page 30.

NOTE: If you have more than one frame on your wireless network, give them unique names so you can tell them apart. Go to Home → Settings → Device configuration menu. See page 20.

www.kodak.com/go/support 29