Doing more with your frame
www.kodak.com/go/support 13
Printing pictures
Your frame is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers.
NOTE: Printing from the Gallery (page 26) is not currently supported.

Preparing the frame and printer for printing

1Make sure your frame is disconnected from the
printer.
2On the frame, change your connection mode from
computer to printer.
See
Manually changing USB
connection mode, page14
.
3Turn off the frame and printer.
4Connect the USB cable (included with your frame)
from the frame to the printer.

Printing to a PictBridge enabled printer

1Turn on the printer. Turn on the frame.
2If you are in a slide show or single view, press .
If you are in thumbnails view, press to find a
picture, then press .
3Highlight Print, press OK, then highlight Print again, and press OK
The picture is printed. To print multiple pictures, see page17.
4Change your connection mode back to Connect to computer. See Manually
changing USB connection mode, page14.