Changing frame settings

Upgrading your firmware

Firmware is the software that runs on your frame. Upgrade the firmware so you always have the newest features and improvements. To check for the latest version, visit www.kodak.com/go/digitalframedownloads.

NOTE: Upgrading the firmware returns the frame settings to factory defaults.

Manually upgrade firmware

Download the firmware to your computer, then upgrade your frame:

1On your computer, go to www.kodak.com/go/digitalframedownloads.

2Follow the screen directions to download the frame firmware to your computer.

3Copy the IMG file to a memory card or USB flash drive, then insert into the frame; or, connect your computer and frame with the USB cable and copy the IMG file directly to the frame. See page 15 for copying files.

4With the IMG file on the frame, press Home , then select Settings and press OK.

5Select Upgrade Firmware and press OK to begin the upgrade.

When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the power switch on the frame to Off, then back to On.

IMPORTANT: Do not turn off the frame during the upgrade!

22

www.kodak.com/go/support

Page 28
Image 28
Kodak EX811, EX1011 manual Upgrading your firmware, Manually upgrade firmware