Blade ICE G8000 manual 100.10.1.0

RackSwitch G8000 Application Guide

Example 2

Use this configuration to block traffic from a network destined for a specific host address. All traffic that ingresses port 10 with source IP from the class 100.10.1.0/24 and destination IP 200.20.2.2 is denied.

1.Configure an Access Control List.

RS G8000		(config)# access-list ip standard 2
RS	G8000	(config-std-nacl)# deny	100.10.1.0 255.255.255.0
RS	G8000	host	200.20.2.2
		(config-std-nacl)# exit

2.Assign the ACL to port 10.

RS G8000		(config)# interface port 10
RS	G8000	(config-if)#	ip access-group 2 in
RS	G8000	(config-if)#	exit

BMD00041, November 2008 Chapter 6: Quality of Service „ 101