Blade ICE G8000 manual User configuration, Privacy-password

RackSwitch G8000 Application Guide

To configure an SNMP user name, enter the following command:

RS G8000 (config)# snmp-server user <1-16>name <1-32>

User configuration:

Users can be configured to use the authentication/privacy options. The G8000 supports two authentication algorithms: MD5 and SHA, as specified in the following command:

snmp-server user <1-16>authentication-protocol md5sha

1.To configure a user with name 'admin,' authentication type MD5, and authentication password of 'admin,' privacy option DES with privacy password of 'admin,' use the fol- lowing CLI commands.

RS G8000 (config)# snmp-server user 5 name admin

RS G8000 (config)# snmp-server user 5 authentication-protocol md5 authentication-password

Changing authentication password; validation required:

Enter current admin password:	<admin. password>
Enter new authentication password:	<auth. password>
Re-enter new authentication password:	<auth. password>
New authentication password accepted.
RS G8000 (config)# snmp-server user 5 privacy-protocol des
privacy-password
Changing privacy password; validation required:
Enter current admin password:	<admin. password>
Enter new privacy password:	<privacy password>
Re-enter new privacy password:	<privacy password>
New privacy password accepted.

2.Configure a user access group, along with the views the group may access. Use the access table to configure the group’s access level.

RS G8000 (config)# snmp-server access 5 name admingrp

RS G8000 (config)# snmp-server access 5 level authpriv

RS G8000 (config)# snmp-server access 5 read-view iso

RS G8000 (config)# snmp-server access 5 write-view iso

RS G8000 (config)# snmp-server access 5 notify-view iso

Because the read view, write view, and notify view are all set to “iso,” the user type has access to all private and public MIBs.

BMD00041, November 2008 Chapter 1: Accessing the Switch „ 21