INSTALLATION
INSTALLATION
Unpacking
Delivery Inspection
After removing the carton, carefully inspect the transfer switch components for any damage that may have occurred during shipment.
IMPORTANT: If loss or damage is noted at time of delivery, have the person(s) making delivery note all damage on the freight bill and affix his signature under the consignor's memo of loss or damage. If loss or damage is noted after delivery, contact the carrier for claim procedures. Freight damaged parts are not warranted.
Shipment Contents
•Manual Power Transfer Switch
•Installation and Operator’s Manual
Mounting Guidelines
The Model 071004 Manual Transfer Switch is enclosed in a NEMA Type 1 enclosure suitable for indoor use only.
The Model 071005 Manual Transfer Switch is enclosed in a NEMA Type 3R enclosure suitable for indoor/outdoor use.
Guidelines for mounting the Manual Transfer Switch include:
•Model 071005 Manual Transfer Switch must be installed with minimum NEMA 3R hardware for conduit connections.
•Install switch on a firm, sturdy supporting structure.
•To assure easy insertion or removal of circuit breakers, level and plumb enclosure.This can be done by placing washers between switch enclosure and mounting surface.
•NEVER install switch where any corrosive substance might drip onto enclosure.
•Protect switch at all times against excessive moisture, dust, dirt, lint, construction grit and corrosive vapors.
The typical installation of the Manual Power Transfer Switch is depicted in Figure 1. Discuss layout suggestions/changes with the owner before beginning the system installation process.
Figure 1 — Typical Switch Mounting
Main |
|
Distribution | Manual |
Panel | |
| Transfer Switch |
Model 071004 shown
6