Atlantis Land Mistral Lan Router ISDN manual Enable dhcp, ⊕set dhcp, ⊕set range

Page 17

enable dhcp

Description: This command enables the Dynamic Host Control Protocol server functionality within the router. When enabled, the router will service a client request for IP address and net mask assignment, as well as assignments of default gateway, DNS server addresses, WINS server addresses and NetBIOS Node Type. The pool of addresses from which the router selects is defined in the table above.. The default is 192.168.168.230, unless re-configured with the “set ip private…” command (or its HTTP equivalent). The term of the lease is 10 hours. The factory default is enabled.

⊕set dhcp

Description: This command configures the global parameters to be supplied to all requesting DHCP clients. Note that the DHCP service can also be enabled or disabled from this command.

Example:

Router> set dhcp

enable DHCP (Yes, Yes/No): yes

configure WINS server (No, Yes/No): yes

enter primary WINS server address (Unspecified): 63.221.98.5

enter secondary WINS server address (Unspecified): 63.221.98.7

enter NetBIOS node type (none, none/b/p/m/h): h Router>

⊕set range

Description: This command sets the bounds for dynamic assignment of IP addresses to both DHCP clients and dial in users. A dialog ensues wherein the user is asked first to enter the upper bound address, and then the lower bound address. The default upper bound is the highest address in the configured private IP subnet. For example, if the configured private IP subnet is 192.168.168.0/255.255.255.0, then the default upper bound for dynamic assignment is 192.168.168.254. The default lower bound is the high address less 253, which, in our example, is 192.168.168.1. Any address lower than the lower bound is not assigned automatically by the router to requesting DHCP clients or dial-in users and may be used for manual configuration of a LAN device (unless used by another router elsewhere on the LAN).

The administrator may alter these addresses to any address that is valid within the configured private IP subnet. The upper bound address must be greater than the lower bound address.

Note that dial in users will be assigned addresses in pairs.

The router will check before assignment of any dynamic address to ensure that it is not in use elsewhere in the network.

If the router’s private IP network is modified, the range values that are in conflict with the new IP network settings will revert to the above mentioned defaults until manually altered by the administrator.

Example:

Router> set range

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Compression Commands Bridging CommandsDial-in User Commands Dhcp CommandsDiagnostic Commands IP Commands Filtering CommandsPort Commands Snmp Commands Profile CommandsSecurity Command System Commands Statistics CommandsPage Disable bridging Interface Name Command Detail Bridging CommandsDisable learning Enable bridging Interface NameClear compression statistics Profile Name Show learningShow learning Interface Name Show compression statistics Profile Name Disable compression Profile NameEnable compression Profile Name ⊕add dhcp entry entry name Disable dhcpAdd dns primary/secondary IPaddr Delete dhcp entry entry name⊕set range Enable dhcp⊕set dhcp Show range Show dhcpShow dhcp table Disable trace Diagnostic Commands Connect profile Profile NameEnable trace Disconnect profile Profile NameTest isdn dial name 64k/56k Show user profile name Delete user profile nameConditions Values Filtering Commands ⊕add filterShow filter ⊕set filter defaultDelete filter ⊕add pat entry public port # ⊕add pat entry default Delete pat entry default Delete ip default routeDelete ip route ipAddr netmask Delete ip Interface NameSet ip private ipaddr netMask Set ip lan ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 255.255.255.0 Show arp tableShow ip routing table Show ipShow ip interface name Show pat Show ip statisticsClear port statistics port name Show tcp statisticsShow udp statistics Show port Disable port port name Enable port port name⊕set port port name Show port statistics port name Show port port nameTotal Packets Total Error B2-Channel Total Octets ⊕add profile Profile Name Example 1 Set up an Internet Access Profile over IsdnDelete profile Profile Name Disable profile Profile NameClear profile statistics Profile Name Show profile Profile Name Enable profile Profile NameShow profile Show profile statistics Security Command Set ip private ipaddr netMaskShow profile statistics Profile Name Clear trap managerSet community string read password Disable trap Enable trapSet trap manager 1-5 ipAddr Show snmp statisticsShow icmp statistics Show trap managerShow Interface Name statistics System Commands Change passwordDisable remote-mgt Enable remote-mgt Clear configDownload config fileName from ipAddr Disconnect telnet sessionSave config Reset systemSet console timeout LogoutSet date mm-dd-yy ⊕set internet access timeSet daylight time on/off Set prompt promptSet system location location information Set system contact nameSet system name system name Set time hhmmssShow internet access time Show configShow connection log Show interface listShow system log Show time Upload config fileName to ipAddrShow telnet session

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.
Top Page Image Contents