Atlantis Land Mistral Lan Router ISDN manual Total Packets Total Error B2-Channel Total Octets

Page 34

Total Octets:

2316

375

Total Packets:

46

10

Total Error:

0

0

B2-Channel

 

 

Total Octets:

0

0

Total Packets:

0

0

Total Error:

0

0

πExample 2:

Router> show port statistics ewan

interface: e1

 

 

----------------------------------------------------------------

 

 

Received

Transmitted

----------------------------------------------------------------

 

Total packets

0

368

Total octets

0

217120

Multicast packets

0

0

Error on interface

0

0

CSMA collisions

0

 

Packets dropped

0

 

Packets with unsupported protocol

0

 

Last update time (sec)

4841

 

Router>

Profile Commands

This section details the commands used to create and manipulate static profiles. Static profiles are created for connections communicating with a remote router. Examples of this type are Internet connections and Remote LAN connections. Unlike user profiles (see “Dial-in User Commands”), which are created dynamically, static profiles are maintained permanently and created at system initialization time from configuration information stored in Flash ROM. The creation of a static profile may cause a static routing entry to be added to one or more of the routing tables, if routing is defined over that profile.

Up to three alternate phone numbers are configurable within a switched connection profile so that if the primary telephone number cannot be connected, each alternate phone number is tried, in turn. An alternate number may be used if the previously tried number failed to connect for any reason. After a disconnection, subsequent connect attempts use the original phone number list.

All other parameters of the Connection Profile will be used for any connected number. A static route is associated with the profile, not any particular telephone number.

The System Log messages will identify any alternate numbers being used. The Connection Log will include the phone number used for a successful connection.

For each alternate phone number, there may be an alternate secondary phone number for multilink connection.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Bridging Commands Compression CommandsDiagnostic Commands Dhcp CommandsDial-in User Commands Filtering Commands IP CommandsPort Commands Security Command Profile CommandsSnmp Commands Statistics Commands System CommandsPage Disable learning Command Detail Bridging CommandsDisable bridging Interface Name Enable bridging Interface NameShow learning Interface Name Show learningClear compression statistics Profile Name Enable compression Profile Name Disable compression Profile NameShow compression statistics Profile Name Add dns primary/secondary IPaddr Disable dhcp⊕add dhcp entry entry name Delete dhcp entry entry name⊕set dhcp Enable dhcp⊕set range Show dhcp table Show dhcpShow range Enable trace Diagnostic Commands Connect profile Profile NameDisable trace Disconnect profile Profile NameTest isdn dial name 64k/56k Delete user profile name Show user profile nameFiltering Commands ⊕add filter Conditions ValuesDelete filter ⊕set filter defaultShow filter ⊕add pat entry public port # ⊕add pat entry default Delete ip route ipAddr netmask Delete ip default routeDelete pat entry default Delete ip Interface NameSet ip lan ipaddr netMask Set ip private ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 Show arp table 255.255.255.0Show ip interface name Show ipShow ip routing table Show ip statistics Show patShow udp statistics Show tcp statisticsClear port statistics port name ⊕set port port name Disable port port name Enable port port nameShow port Show port port name Show port statistics port nameTotal Packets Total Error B2-Channel Total Octets Example 1 Set up an Internet Access Profile over Isdn ⊕add profile Profile NameClear profile statistics Profile Name Disable profile Profile NameDelete profile Profile Name Show profile Enable profile Profile NameShow profile Profile Name Show profile statistics Profile Name Security Command Set ip private ipaddr netMaskShow profile statistics Clear trap managerSet trap manager 1-5 ipAddr Disable trap Enable trapSet community string read password Show snmp statisticsShow trap manager Show icmp statisticsSystem Commands Change password Show Interface Name statisticsDownload config fileName from ipAddr Clear configDisable remote-mgt Enable remote-mgt Disconnect telnet sessionSet console timeout Reset systemSave config LogoutSet daylight time on/off ⊕set internet access timeSet date mm-dd-yy Set prompt promptSet system name system name Set system contact nameSet system location location information Set time hhmmssShow connection log Show configShow internet access time Show interface listShow system log Show telnet session Upload config fileName to ipAddrShow time

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.
Top Page Image Contents