Atlantis Land Mistral Lan Router ISDN manual IP Commands

Page 24

Interface Name:

ppp2

IP Protocol:

any

 

Src. IP:

212.54.104.1

Src. Port: 136

 

 

Dest. IP:

any

 

Dest. Port:

any

show filter <1-8 >

Description: This command displays the definition of the nth rule.

Example:

Router> show filter 1

 

 

 

Filter 1:

 

 

 

Filter Name:

Rule1

 

 

Interface Name: ppp2

 

IP Protocol:

any

Src. IP:

212.54.104.1

Src. Port:

136

Dest. IP:

any

Dest. Port:

any

IP Commands

add ip route <dest-ipAddr><netMask><gateway-ipAddr ><hop count, 1-15> add ip route <dest-ipAddr><netMask><Profile Name>< hop count, 1-15>

Description: This command adds a static route to the IP routing table. The first example means that to send a packet to the destination IP address 204.71.220.153, the packet should be forwarded to

204.23.0.1first, and the target is 4 hops away. The second example means that to send a packet to the destination IP address 204.71.220.153, the packet should be sent out over the frame relay profile isp2 first, and the target is 4 hops away.

Example:

Router> add ip route 204.71.220.153 255.255.255.0 204.23.0.1 4

Router> add ip route 204.71.220.153 255.255.255.0 isp2 4

⊕add pat entry <public port #>

⊕add pat entry default

Description: Each IP packet received from the Internet interface is examined. If the destination address is the public address of the interface, the Network Address Translation Table is searched for a match. If the address is found, the destination address is replaced with the associated private address and port number. The packet is then forwarded to the IP routing process. If no match is found and a Default Private Receiver is defined, the packet is forwarded to this machine. If no match is found and a Default Private Receiver is not defined, the packet is discarded.

Static entries may be created in this table by these commands.

Note that static entries are mapped according to port number and therefore multiple protocols using the same port number will be routed to the mapped entry.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Bridging Commands Compression CommandsDhcp Commands Diagnostic CommandsDial-in User Commands Filtering Commands IP CommandsPort Commands Profile Commands Security CommandSnmp Commands Statistics Commands System CommandsPage Command Detail Bridging Commands Disable bridging Interface NameDisable learning Enable bridging Interface NameShow learning Show learning Interface NameClear compression statistics Profile Name Disable compression Profile Name Enable compression Profile NameShow compression statistics Profile Name Disable dhcp ⊕add dhcp entry entry nameAdd dns primary/secondary IPaddr Delete dhcp entry entry nameEnable dhcp ⊕set dhcp⊕set range Show dhcp Show dhcp tableShow range Diagnostic Commands Connect profile Profile Name Disable traceEnable trace Disconnect profile Profile NameTest isdn dial name 64k/56k Delete user profile name Show user profile nameFiltering Commands ⊕add filter Conditions Values⊕set filter default Delete filterShow filter ⊕add pat entry public port # ⊕add pat entry default Delete ip default route Delete pat entry defaultDelete ip route ipAddr netmask Delete ip Interface NameSet ip lan ipaddr netMask Set ip private ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 Show arp table 255.255.255.0Show ip Show ip interface nameShow ip routing table Show ip statistics Show patShow tcp statistics Show udp statisticsClear port statistics port name Disable port port name Enable port port name ⊕set port port nameShow port Show port port name Show port statistics port nameTotal Packets Total Error B2-Channel Total Octets Example 1 Set up an Internet Access Profile over Isdn ⊕add profile Profile NameDisable profile Profile Name Clear profile statistics Profile NameDelete profile Profile Name Enable profile Profile Name Show profileShow profile Profile Name Security Command Set ip private ipaddr netMask Show profile statisticsShow profile statistics Profile Name Clear trap managerDisable trap Enable trap Set community string read passwordSet trap manager 1-5 ipAddr Show snmp statisticsShow trap manager Show icmp statisticsSystem Commands Change password Show Interface Name statisticsClear config Disable remote-mgt Enable remote-mgtDownload config fileName from ipAddr Disconnect telnet sessionReset system Save configSet console timeout Logout⊕set internet access time Set date mm-dd-yySet daylight time on/off Set prompt promptSet system contact name Set system location location informationSet system name system name Set time hhmmssShow config Show internet access timeShow connection log Show interface listShow system log Upload config fileName to ipAddr Show telnet sessionShow time

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.
Top Page Image Contents