Atlantis Land Mistral Lan Router ISDN Set ip rip Interface Name disabled/passive/active rip1/rip2

Page 27

Note that the router may also communicate with devices in a “public” IP network, as defined in the command “set ip lan <ip_addr> <netMask>”.

When you modify the private IP network, related routes in the IP Routing Table and all entries in the Static DHCP table and the Network Address Translation table which conflict with the new address space will be deleted. You will receive a warning message asking if you would like this to be done.

Example:

Router> set ip private 10.0.1.168 255.255.255.0

set ip rip [Interface Name] <disabled/passive/active> <rip1/rip2>

Description: This command sets the IP RIP state to the disabled mode, passive mode or active mode. When in the passive mode, the router will receive RIP broadcast data from other routers (but not transmit); when in active mode, it will receive RIP broadcast data from other routers, and also broadcast the routing table and routing table updates as necessary. When “Interface Name” is omitted, the command applies to the entire system. The default mode is Active.

One common way of configuring routers for a central site and a remote (relatively small) site network is as follows: assume the local site is a small branch network, which is connected to a central site, through which many other networks can be reached. Instead of allowing both routers to turn on RIP, a better way is to turn on RIP for the branch, but set the central site to be in the passive mode only. Thus, the central site will not send its routing table to the branch router, but the branch site will send the routing table and updates to the central site. Additionally, on the branch router, the user should set the default route to the WAN connection that leads to the central site.

Now, from the central site’s point of view, since it still sees all networks at the branch site, it has no problem routing any packet to the remote site. On the other hand, from the remote site’s perspective, whenever a packet is to be routed, the remote site router will apply the standard routing algorithm to the packet and, if no route can be found, the packet will just be passed on to the central site for resolution. The idea is that the central site has the complete routing table, and thus “should” know how to route the packet. With that assumption, the branch router is relieved of the burden of having to receive routing table updates from the central site (which, in case of a large network, could be a huge routing table containing hundreds or thousands of routing entries).

RIP, version 1 (or RIP1) transmits its routing table without subnet or next hop information, while RIP, version 2 (or RIP2) includes this information. These two versions are not compatible and RIP2 should only be specified when communicating to other RIP2 routers.

set ip <Profile Name>

set ip <Profile Name> < local-ipAddr> <netMask> <remote-ipAddr>

Description: This command enables IP routing over the connection specified by Profile Name. Additionally, a WAN connection that supports IP routing, may, either be assigned zero or two IP addresses. If none are assigned, the connection is termed unnumbered, a popular feature available in newer routers (since the connection does not consume IP addresses). Numbered connections are assigned two addresses, one at each end of the connection (complete with the network mask).

Example 1:

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Compression Commands Bridging CommandsDhcp Commands Diagnostic CommandsDial-in User Commands IP Commands Filtering CommandsPort Commands Profile Commands Security CommandSnmp Commands System Commands Statistics CommandsPage Enable bridging Interface Name Command Detail Bridging CommandsDisable bridging Interface Name Disable learningShow learning Show learning Interface NameClear compression statistics Profile Name Disable compression Profile Name Enable compression Profile NameShow compression statistics Profile Name Delete dhcp entry entry name Disable dhcp⊕add dhcp entry entry name Add dns primary/secondary IPaddrEnable dhcp ⊕set dhcp⊕set range Show dhcp Show dhcp tableShow range Disconnect profile Profile Name Diagnostic Commands Connect profile Profile NameDisable trace Enable traceTest isdn dial name 64k/56k Show user profile name Delete user profile nameConditions Values Filtering Commands ⊕add filter⊕set filter default Delete filterShow filter ⊕add pat entry public port # ⊕add pat entry default Delete ip Interface Name Delete ip default routeDelete pat entry default Delete ip route ipAddr netmaskSet ip private ipaddr netMask Set ip lan ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 255.255.255.0 Show arp tableShow ip Show ip interface nameShow ip routing table Show pat Show ip statisticsShow tcp statistics Show udp statisticsClear port statistics port name Disable port port name Enable port port name ⊕set port port nameShow port Show port statistics port name Show port port nameTotal Packets Total Error B2-Channel Total Octets ⊕add profile Profile Name Example 1 Set up an Internet Access Profile over IsdnDisable profile Profile Name Clear profile statistics Profile NameDelete profile Profile Name Enable profile Profile Name Show profileShow profile Profile Name Clear trap manager Security Command Set ip private ipaddr netMaskShow profile statistics Show profile statistics Profile NameShow snmp statistics Disable trap Enable trapSet community string read password Set trap manager 1-5 ipAddrShow icmp statistics Show trap managerShow Interface Name statistics System Commands Change passwordDisconnect telnet session Clear configDisable remote-mgt Enable remote-mgt Download config fileName from ipAddrLogout Reset systemSave config Set console timeoutSet prompt prompt ⊕set internet access timeSet date mm-dd-yy Set daylight time on/offSet time hhmmss Set system contact nameSet system location location information Set system name system nameShow interface list Show configShow internet access time Show connection logShow system log Upload config fileName to ipAddr Show telnet sessionShow time

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.
Top Page Image Contents