Atlantis Land Mistral Lan Router ISDN manual Show system log

Page 47

Example:

Router> show system

 

 

 

 

 

System Name: Router

 

 

Up Time: 0 months 1 days 21:21:05

----------------------------------------------------------------------

 

 

system description:

IP Brouter Over ISDN Line

 

 

system contact:

Unknown

 

 

 

 

system location:

Unknown

 

 

 

 

community string (read):

public

 

 

 

 

Trap generation:

Disabled

 

 

 

 

Total Serial Ports: 1

S/W Version:

1.03

H/W Version:

1.0

MAC Address:

00-60-20-10-00-70

 

 

 

Console Baud Rate :

19200

 

 

 

 

Console Timeout: 10(min)

 

Learning State:

Enabled

 

Remote Management State:

Enabled

 

 

 

 

DHCP State:

Enabled

 

 

 

 

IP RIP Mode:

Active Ver.1

 

 

 

IP address:

0.0.0.0

 

 

network mask:

0.0.0.0

Private IP address:192.168.168.230

network mask:

255.255.255.0

 

Enabled features: HTTP Compression SNMP Filter NAS CLI L2L Bridging

 

show system log

Description: The system log contains logs of various events of interest, depending on the log level set at the time. Common events include login, a PPP connection goes up or down (log level 2), a frame relay DLCI connection goes up or down (log level 2), … as well as certain protocol progress messages for debugging purposes.

This command shows the next 22 entries of the system log. For example, if there are 60 entries in the log, the first “show system log” command will show log entries 1 through 23, the next command will show entries 24 through 46, and the next command will show entries 47 through 60, followed by 1 through 9. When the system powers up, the log is re-initialized and contains no entries. As time passes, when the 128-entry log table becomes full, new entries will simply replace the oldest entries, thus a first-in, first-out scheme is used.

Example:

1Sep-03-99 16:52:48 PPP Network Protocol Event: mdm3.2 IPCP Inactivity

2Sep-03-99 17:21:59 ISDN: ACTV REQ

3Sep-03-99 17:22:11 ISDN: T3 Expire State = F4

4Sep-03-99 17:22:11 ISDN: Line De-activated

5Sep-03-99 17:27:40 ISDN: ACTV REQ

6Sep-03-99 17:27:50 ISDN: ACTV REQ

7Sep-03-99 17:27:52 ISDN: T3 Expire State = F4

8Sep-03-99 17:27:52 ISDN: Line De-activated

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Compression Commands Bridging CommandsDial-in User Commands Dhcp CommandsDiagnostic Commands IP Commands Filtering CommandsPort Commands Snmp Commands Profile CommandsSecurity Command System Commands Statistics CommandsPage Enable bridging Interface Name Command Detail Bridging CommandsDisable bridging Interface Name Disable learningClear compression statistics Profile Name Show learningShow learning Interface Name Show compression statistics Profile Name Disable compression Profile NameEnable compression Profile Name Delete dhcp entry entry name Disable dhcp⊕add dhcp entry entry name Add dns primary/secondary IPaddr⊕set range Enable dhcp⊕set dhcp Show range Show dhcpShow dhcp table Disconnect profile Profile Name Diagnostic Commands Connect profile Profile NameDisable trace Enable traceTest isdn dial name 64k/56k Show user profile name Delete user profile nameConditions Values Filtering Commands ⊕add filterShow filter ⊕set filter defaultDelete filter ⊕add pat entry public port # ⊕add pat entry default Delete ip Interface Name Delete ip default routeDelete pat entry default Delete ip route ipAddr netmaskSet ip private ipaddr netMask Set ip lan ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 255.255.255.0 Show arp tableShow ip routing table Show ipShow ip interface name Show pat Show ip statisticsClear port statistics port name Show tcp statisticsShow udp statistics Show port Disable port port name Enable port port name⊕set port port name Show port statistics port name Show port port nameTotal Packets Total Error B2-Channel Total Octets ⊕add profile Profile Name Example 1 Set up an Internet Access Profile over IsdnDelete profile Profile Name Disable profile Profile NameClear profile statistics Profile Name Show profile Profile Name Enable profile Profile NameShow profile Clear trap manager Security Command Set ip private ipaddr netMaskShow profile statistics Show profile statistics Profile NameShow snmp statistics Disable trap Enable trapSet community string read password Set trap manager 1-5 ipAddrShow icmp statistics Show trap managerShow Interface Name statistics System Commands Change passwordDisconnect telnet session Clear configDisable remote-mgt Enable remote-mgt Download config fileName from ipAddrLogout Reset systemSave config Set console timeoutSet prompt prompt ⊕set internet access timeSet date mm-dd-yy Set daylight time on/offSet time hhmmss Set system contact nameSet system location location information Set system name system nameShow interface list Show configShow internet access time Show connection logShow system log Show time Upload config fileName to ipAddrShow telnet session

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.
Top Page Image Contents