Atlantis Land Mistral Lan Router ISDN Disable port port name Enable port port name, Show port

Page 32

disable port <port name>

enable port <port name>

Description: These two commands is used to disable or enable a port.

set port <port name>

The set port command is used to initialize or modify the characteristics of a hardware port on your router. Hardware ports are identified by port name and are model-specific. The name “ISDN” means the ISDN BRI interface. πThe name “ewan” stands for Ethernet-based WAN port which is connected to broadband modem.

PORT TYPE: ISDN

Description: This command configures the ISDN port. For European users, select Switch Type as “Europe (ETSI)” and configure the related parameters.

Example:

Router> set port isdn

 

 

 

enter switch : 1> Japan (INS Net) 2> Europe (ETSI) 3> NT DMS-100

 

 

4> NI-1

5> ATT5ESS (MP)

6> ATT5ESS (P2P)

7> Taiwan

8> OCN

9> Permanent 64K

10> IDSL/Perm 128K 0> AutoDetect, [0]: 2

How many directory numbers [DN] are assigned (1, 0-3): 2

enter Directory Number 1 [DN1] [Unspecified]: 5551111

enter Directory Number 2 [DN2] [Unspecified]: 5552222 Port isdn is configured successfully.

Router>

πPORT TYPE: EWAN

Description: This command is used to enable the ewan port.

Example:

Router> set port ewan

Port ewan is configured successfully.

Router>

show port

Description: This command displays the configuration information for all ports.

Example:

Router> show port

Port Name :

isdn

Port Type :

ISDN

Admin Status:

Enabled

Op State:

Down

Image 32
Contents Mistral Lan Router Isdn Support Console Commands Express Mode vs. Advanced Mode Conventions Bridging Commands Compression CommandsDial-in User Commands Dhcp CommandsDiagnostic Commands Filtering Commands IP CommandsPort Commands Snmp Commands Profile CommandsSecurity Command Statistics Commands System CommandsPage Command Detail Bridging Commands Disable bridging Interface NameDisable learning Enable bridging Interface NameClear compression statistics Profile Name Show learningShow learning Interface Name Show compression statistics Profile Name Disable compression Profile NameEnable compression Profile Name Disable dhcp ⊕add dhcp entry entry nameAdd dns primary/secondary IPaddr Delete dhcp entry entry name⊕set range Enable dhcp⊕set dhcp Show range Show dhcpShow dhcp table Diagnostic Commands Connect profile Profile Name Disable traceEnable trace Disconnect profile Profile NameTest isdn dial name 64k/56k Delete user profile name Show user profile nameFiltering Commands ⊕add filter Conditions ValuesShow filter ⊕set filter defaultDelete filter ⊕add pat entry public port # ⊕add pat entry default Delete ip default route Delete pat entry defaultDelete ip route ipAddr netmask Delete ip Interface NameSet ip lan ipaddr netMask Set ip private ipaddr netMaskSet ip rip Interface Name disabled/passive/active rip1/rip2 Show arp table 255.255.255.0Show ip routing table Show ipShow ip interface name Show ip statistics Show patClear port statistics port name Show tcp statisticsShow udp statistics Show port Disable port port name Enable port port name⊕set port port name Show port port name Show port statistics port nameTotal Packets Total Error B2-Channel Total Octets Example 1 Set up an Internet Access Profile over Isdn ⊕add profile Profile NameDelete profile Profile Name Disable profile Profile NameClear profile statistics Profile Name Show profile Profile Name Enable profile Profile NameShow profile Security Command Set ip private ipaddr netMask Show profile statisticsShow profile statistics Profile Name Clear trap managerDisable trap Enable trap Set community string read passwordSet trap manager 1-5 ipAddr Show snmp statisticsShow trap manager Show icmp statisticsSystem Commands Change password Show Interface Name statisticsClear config Disable remote-mgt Enable remote-mgtDownload config fileName from ipAddr Disconnect telnet sessionReset system Save configSet console timeout Logout⊕set internet access time Set date mm-dd-yySet daylight time on/off Set prompt promptSet system contact name Set system location location informationSet system name system name Set time hhmmssShow config Show internet access timeShow connection log Show interface listShow system log Show time Upload config fileName to ipAddrShow telnet session

Mistral Lan Router ISDN specifications

The Atlantis Land Mistral Lan Router ISDN is a streamlined networking solution designed to meet the demands of modern home and small office environments. Combining functionality with user-friendly features, this router provides a reliable connection for multiple devices, ensuring high-speed internet access and efficient data transmission.

One of the standout features of the Mistral is its ISDN compatibility, allowing users to integrate their existing digital phone lines with the network. This is particularly beneficial for businesses that require dependable and clear voice communications alongside internet connectivity. The system supports both BRI (Basic Rate Interface) and PRIs (Primary Rate Interface), making it adaptable for various telephony needs.

The router is equipped with advanced routing protocols, offering robust performance for data-heavy applications such as video conferencing and online gaming. It supports NAT (Network Address Translation), enabling multiple devices to share a single IP address while maintaining reliable connections. In addition, the Mistral utilizes DHCP (Dynamic Host Configuration Protocol), which simplifies the process of assigning IP addresses to devices on the network, allowing for easy scalability as more devices are added.

Security is a priority with the Atlantis Land Mistral, and it comes with built-in firewall capabilities to protect against unauthorized access and cyber threats. The router supports various encryption methods, ensuring that data transmitted over the network remains secure. These features are essential for users who frequently deal with sensitive information or those who operate in data-sensitive industries.

The configuration process of the Mistral is user-friendly, thanks to its intuitive web-based interface that allows for quick setup and management. Users can easily monitor network performance, manage connected devices, and customize settings to optimize connectivity based on their specific requirements.

Additionally, the Mistral Lan Router ISDN is designed with energy efficiency in mind, incorporating features that minimize power consumption without sacrificing performance. Its compact design ensures that it fits seamlessly into any workspace, making it a practical choice for users seeking a reliable and aesthetically pleasing networking solution.

In summary, the Atlantis Land Mistral Lan Router ISDN stands out for its ISDN compatibility, advanced routing capabilities, strong security features, user-friendly setup, and energy efficiency. It serves as a comprehensive networking solution that caters to both home users and small businesses, ensuring reliable connectivity and high performance in a competitive digital landscape.