Atlantis Land Network Router manual Installing the USB Driver, For Windows XP

Page 15

Chapter 3

Installation and Configuration

3.1 Installing the USB Driver

If you connect the ADSL Modem/Router through USB port, for the first time the USB cable is connected to the PC, Windows will automatically detect the device. Follow the steps to install the USB driver.

3.1.1 For Windows XP

1.When Windows tells you that the new device has been detected, select “Install from a list or specific location” and click “Next >”.

2.Insert the installation CD into the CD-ROM drive. Check “Include this location for the search” and click “Browse”. (the folder CD:\A02-WRA-11B\Driver). Then, it takes seconds to search and install the software.

9

Image 15

Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Chapter Fly Wireless Router AdslIntroduction An Overview of I-Fly Wireless Router AdslAdsl Modem/Router Features Package ContentsIntroduction Hardware IndicatorsLED Indicators Front PanelLink/Act Rear PanelRxD 10/100Jack ResetSwitch LineRJ11Connect Router to LAN Hardware InstallationPower on Adsl connectionCabling Using Adsl Modem/RouterFly Wireless Router Adsl For Windows XP Installing the USB DriverFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 Factory Default Settings PasswordLAN and WAN Port Addresses For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50 Information from ISPConfiguring with Web Browser Fly Wireless Router Adsl Click Show Advanced settings Status HomeStatus Adsl Status Status LAN Configuration WAN ConfigurationSystem Wide Settings Encapsulation Service Category Select UBR or CBRConfiguration LAN Configuration Subnet Mask Default at Fly Wireless Router Adsl IP Address Default atConfiguration NAT Configuration Ethernet Mode SettingFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Admin Privilege WAN Status Configuration Save SettingsAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Admin Privilege Learned Bridge MAC Table Admin Privilege Adsl ConfigurationTrellis Default at Enabled Admin Privilege RIP Configuration Admin Privilege Miscellaneous Configuration Admin Privilege Password ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Diagnostic Test Admin Privilege Reset to Factory DefaultChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Network Code Image Update Admin Privilege Code Image UpdateAdmin Privilege System Log Problem Corrective Action Problems Starting Up the Adsl RouterProblems with the WAN Interface Problems with the LAN InterfaceTroubleshooting Problems Connecting to a Remote Node or ISPOperating Temperature Power AdapterPhysical Dimension WeightScenario Bridge RFC RFC 1483 R PPPoA PPPoE Configuration DefaultVC Setting PPP ServiceEthernet mode PPP passwordConfiguration End address Lease Time User modePreferred DNS Configuration TrellisWiring Misc Configuration WAN sideIgmp proxy On WAN accessDMZ Host IP Dhcp RelaySupport