Atlantis Land Network Router manual Factory Default Settings, Password, LAN and WAN Port Addresses

Page 33

Chapter 3 Installation and Configuration

3.3 Factory Default Settings

Before you configure this device, you need to know the following default settings.

1.Web Configurator

Password: There are two levels of password protection, Administrator Level and User Level.

	User Name	Password

Administrator Level	admin	epicrouter

User Level	user	password

2.Device IP Network settings in LAN site IP Address: 10.0.0.2

Subnet Mask: 255.0.0.0

3.ISP setting in WAN site

Virtual Circuit 0: PPPoA VCMux

Virtual Circuit 1 ~ 7: 1483 Bridged IP LLC

4.DHCP server

DHCP server is enabled.

IP address pool from IP Address: 10.0.0.4 to IP Address: 10.0.0.15

3.2.1 Password

There are two levels of password protection. The first level is for administrator and the second one is for user.

If you want to configure the device with administrator level, type admin in the username field and epicrouter in the password field. If you want to configure the device with the user level, type user in the username field and password in the password field. Then, click “OK” to log in. You can modify these passwords for security and management purpose.

If you ever forget the password to log in, you should contact the dealer where you bought this product.

3.2.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

		LAN Port	WAN Port

	IP address	10.0.0.2	PPPoA with VCMux

	Subnet Mask	255.0.0.0

	DHCP server function	Enabled

27

Image 33

Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Chapter Fly Wireless Router AdslIntroduction An Overview of I-Fly Wireless Router AdslAdsl Modem/Router Features Package ContentsLED Indicators Hardware IndicatorsFront Panel IntroductionRxD Rear Panel10/100 Link/ActSwitch ResetLineRJ11 JackPower on Hardware InstallationAdsl connection Connect Router to LANCabling Using Adsl Modem/RouterFly Wireless Router Adsl For Windows XP Installing the USB DriverFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 Factory Default Settings PasswordLAN and WAN Port Addresses For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50 Information from ISPConfiguring with Web Browser Fly Wireless Router Adsl Click Show Advanced settings Status HomeStatus Adsl Status Status LAN Configuration WAN ConfigurationSystem Wide Settings Encapsulation Service Category Select UBR or CBRConfiguration LAN Configuration Subnet Mask Default at Fly Wireless Router Adsl IP Address Default atConfiguration NAT Configuration Ethernet Mode SettingFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Admin Privilege WAN Status Configuration Save SettingsAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Admin Privilege Learned Bridge MAC Table Admin Privilege Adsl ConfigurationTrellis Default at Enabled Admin Privilege RIP Configuration Admin Privilege Miscellaneous Configuration Admin Privilege Password ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Diagnostic Test Admin Privilege Reset to Factory DefaultChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Network Code Image Update Admin Privilege Code Image UpdateAdmin Privilege System Log Problems with the WAN Interface Problems Starting Up the Adsl RouterProblems with the LAN Interface Problem Corrective ActionTroubleshooting Problems Connecting to a Remote Node or ISPPhysical Dimension Power AdapterWeight Operating TemperatureVC Setting Configuration DefaultPPP Service Scenario Bridge RFC RFC 1483 R PPPoA PPPoEConfiguration PPP passwordEnd address Lease Time User mode Ethernet modeWiring Configuration TrellisMisc Configuration WAN side Preferred DNSDMZ Host IP On WAN accessDhcp Relay Igmp proxySupport