Atlantis Land Network Router manual Checking LAN Connection Testing Ethernet LAN connection

Page 59

Chapter 3 Installation and Configuration

Checking LAN Connection

Testing Ethernet LAN connection

This test passes if the Ethernet LAN interface is working properly.

Checking ADSL Connection

Testing ADSL Synchronization

This test checks your DSL modem to see if it can successfully negotiate and establish a DSL connection with your service provider's central office equipments. The test returns PASS if a DSL connection is established.

If this test returns FAIL, please try the test again a few minutes after this test is completed. Since your DSL modem need a couple of seconds to a few minutes to establish the DSL connection depending on your phone line quality. If this test returns FAIL, make sure your phone line is connected to your DSL modem securely, and also check with your service provider to see if your service is activated.

If this test returns FAIL, all other tests will be skipped.

Checking Circuit 0 for Network Connection

Test ATM OAM Segment Loop Back

This test sends ATM OAM F5 Segment loop back request cells to the central office equipments through your DSL connection. This test will pass if response cell is received. Since your service provider might not support this test, your DSL modem could still work even if this test fails.

If this test fails consistently and your DSL modem seems not working, check to make sure the VPI and VCI are configured correctly.

This test returns FAIL if the DSL synchronization test failed.

Test ATM OAM End-to-End Loop Back

This test sends ATM OAM F5 End-to-End loop back request cells to the central office equipments through your DSL connection. This test returns PASS if response cell is received. Since your service provider might not support this test, your DSL modem could still work even if this test fails.

If this test return FAIL consistently and your DSL modem seems not working, check to make sure the VPI and VCI are configured correctly.

This test returns SKIPPED if the DSL synchronization test failed.

Test Ethernet connect to ATM

This test returns PASS if the ATM AAL5 module is loaded correctly in your DSL modem. If this test returns FAIL, an internal error has occurred.

This test returns SKIPPED if the DSL synchronization does not return PASS.

53

Image 59
Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Chapter Fly Wireless Router AdslIntroduction An Overview of I-Fly Wireless Router AdslAdsl Modem/Router Features Package ContentsIntroduction Hardware IndicatorsLED Indicators Front PanelLink/Act Rear PanelRxD 10/100Jack ResetSwitch LineRJ11Connect Router to LAN Hardware InstallationPower on Adsl connectionCabling Using Adsl Modem/RouterFly Wireless Router Adsl For Windows XP Installing the USB DriverFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 LAN and WAN Port Addresses Factory Default SettingsPassword For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50 Information from ISPConfiguring with Web Browser Fly Wireless Router Adsl Status Adsl Status Click Show Advanced settingsStatus Home Status LAN Configuration WAN ConfigurationSystem Wide Settings Encapsulation Service Category Select UBR or CBRConfiguration LAN Configuration Subnet Mask Default at Fly Wireless Router Adsl IP Address Default atConfiguration NAT Configuration Ethernet Mode SettingFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Admin Privilege WAN Status Configuration Save SettingsAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Trellis Default at Enabled Admin Privilege Learned Bridge MAC TableAdmin Privilege Adsl Configuration Admin Privilege RIP Configuration Admin Privilege Miscellaneous Configuration Admin Privilege Password ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Diagnostic Test Admin Privilege Reset to Factory DefaultChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Network Code Image Update Admin Privilege Code Image UpdateAdmin Privilege System Log Problem Corrective Action Problems Starting Up the Adsl RouterProblems with the WAN Interface Problems with the LAN InterfaceTroubleshooting Problems Connecting to a Remote Node or ISPOperating Temperature Power AdapterPhysical Dimension WeightScenario Bridge RFC RFC 1483 R PPPoA PPPoE Configuration DefaultVC Setting PPP ServiceEthernet mode PPP passwordConfiguration End address Lease Time User modePreferred DNS Configuration TrellisWiring Misc Configuration WAN sideIgmp proxy On WAN accessDMZ Host IP Dhcp RelaySupport