Atlantis Land Network Router manual Encapsulation, Service Category Select UBR or CBR

Page 40

I-Fly Wireless Router ADSL

Enabled? : Select Yes if you want to enable the settings of this VC or select No if you want to disable the settings of this VC.

VPI: Consult the telephone company to get the Virtual Path Identifier (VPI) number. The default value is 0.

VCI: Consult the telephone company to get the Virtual Channel Identifier (VCI) number. The default value is 32.

Static IP Address: Enter the information provided by your ISP.

Subnet Mask: Enter the information provided by your ISP.

ATM

Service Category: Select UBR or CBR.

Bandwidth: Enter the bandwidth.

ENCAPSULATION

There are eleven ways PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mux, PPPoA LLC, 1483 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-Mux, 1483 Routed IP LLC, Classical IP over ATM, Native ATM for the device to have a public IP address and then to access Internet. You have to check with your ISP about which way is adopted.

BRIDGE

If you set this device to be bridge mode, select Enable; if not, please select Disable.

IGMP

You can Enable or Disable this function.

PPP

If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.

Service Name: This item is for identification purpose. If it is required, your ISP will provide you the information. Maximum input is 31 alphanumeric characters.

Username: Enter the username provided by your ISP.

Password: Enter the password provided by your ISP.

Disconnect Timeout seconds: Auto-disconnect the ADSL Router when there is no activity on the line for a predetermined period of time. You can input any number from 0 to 32767. The default value is

0seconds.

Authentication: Default at “Auto”.

Automatic Reconnect: Check to enable this device to automatically re-establish the PPPoE session when disconnected by ISP.

DHCP

34

Image 40
Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Fly Wireless Router Adsl ChapterAn Overview of I-Fly Wireless Router Adsl IntroductionPackage Contents Adsl Modem/Router FeaturesHardware Indicators LED IndicatorsFront Panel IntroductionRear Panel RxD10/100 Link/ActReset SwitchLineRJ11 JackHardware Installation Power onAdsl connection Connect Router to LANUsing Adsl Modem/Router CablingFly Wireless Router Adsl Installing the USB Driver For Windows XPFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 Password Factory Default SettingsLAN and WAN Port Addresses Information from ISP For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50Configuring with Web Browser Fly Wireless Router Adsl Status Home Click Show Advanced settingsStatus Adsl Status Configuration WAN Configuration Status LANSystem Wide Settings Service Category Select UBR or CBR EncapsulationConfiguration LAN Configuration Fly Wireless Router Adsl IP Address Default at Subnet Mask Default atEthernet Mode Setting Configuration NAT ConfigurationFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Configuration Save Settings Admin Privilege WAN StatusAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Admin Privilege Adsl Configuration Admin Privilege Learned Bridge MAC TableTrellis Default at Enabled Admin Privilege RIP Configuration Admin Privilege Password Configuration Admin Privilege Miscellaneous ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Reset to Factory Default Admin Privilege Diagnostic TestChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Code Image Update Admin Privilege Network Code Image UpdateAdmin Privilege System Log Problems Starting Up the Adsl Router Problems with the WAN InterfaceProblems with the LAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP TroubleshootingPower Adapter Physical DimensionWeight Operating TemperatureConfiguration Default VC SettingPPP Service Scenario Bridge RFC RFC 1483 R PPPoA PPPoEPPP password ConfigurationEnd address Lease Time User mode Ethernet modeConfiguration Trellis WiringMisc Configuration WAN side Preferred DNSOn WAN access DMZ Host IPDhcp Relay Igmp proxySupport