Atlantis Land Network Router manual Package Contents, Adsl Modem/Router Features

Page 8

I-Fly Wireless Router ADSL

1.2Package Contents

1.I-Fly Wireless Router ADSL

2.One CD-ROM containing the driver and online manual

3.One Quick Start Guide

4.One RJ-11 ADSL/telephone cable

5.One CAT-5 LAN cable

6.One USB cable

7.One power adapter

1.3ADSL Modem/Router Features

ADSL Modem/Router provides the following features:

ADSL Multi-Mode Standard: Supports downstream transmission rates of up to 8Mbps and upstream transmission rates of up to 1024Kbps. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.lite (G992.2); G.hs (G994.1)).

Multi-Protocol to Establish A Connection: Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516) and IPoA (RFC1577) to establish a connection with ISP. The product also supports VC-based and LLC-based multiplexing.

Wireless (IEEE802.11b):This is the device for a total freedom of movement without losing the connection.

Network Address Translation (NAT): Allows multi-users to access outside resource such as Internet simultaneously with one IP address/one Internet access account. Besides, many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Ping and others.

Domain Name System (DNS) relay: Provides an easy way to map the domain name (a friendly name for user such as www.yahoo.com) and IP address. When local machine sets its DNS server with this router’s IP address. Then every DNS conversion request packet from the PC to this router will be forwarded to the real DNS in outside network. After the router gets the reply, then forwards it back to the PC.

PPPover Ethernet (PPPoE): Provides embedded PPPoE client function to establish a connection. Users can get greater access speed without changing the operation concept, sharing the same ISP account and paying for one access account. No PPPoE client software is required for local computer. The Automatic Reconnect and Disconnect Timeout (Idle Timer) functions are provided, too.

Virtual Server: User can specify some services to be visible from outside users. The router can detect incoming service request and forward it to the specific local computer to handle it. For example, user can assign a PC in LAN acting as WEB server inside and expose it to the outside network. Outside user can browse inside web server directly while it is protected by NAT. A DMZ host setting is also provided to a local computer exposed to the outside network, Internet.

Bridge Filtering: Filters the packet based on MAC address. It will increase the performance in LAN and WAN, also provide a higher-level security control.

Dynamic Host Control Protocol (DHCP) client and server: In the WAN site, the DHCP client can get an IP address from the Internet Server Provider (ISP) automatically. In the LAN site, the DHCP server

2

Image 8
Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Fly Wireless Router Adsl ChapterAn Overview of I-Fly Wireless Router Adsl IntroductionPackage Contents Adsl Modem/Router FeaturesHardware Indicators LED IndicatorsFront Panel IntroductionRear Panel RxD10/100 Link/ActReset SwitchLineRJ11 JackHardware Installation Power onAdsl connection Connect Router to LANUsing Adsl Modem/Router CablingFly Wireless Router Adsl Installing the USB Driver For Windows XPFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 LAN and WAN Port Addresses Factory Default SettingsPassword Information from ISP For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50Configuring with Web Browser Fly Wireless Router Adsl Status Adsl Status Click Show Advanced settingsStatus Home Configuration WAN Configuration Status LANSystem Wide Settings Service Category Select UBR or CBR EncapsulationConfiguration LAN Configuration Fly Wireless Router Adsl IP Address Default at Subnet Mask Default atEthernet Mode Setting Configuration NAT ConfigurationFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Configuration Save Settings Admin Privilege WAN StatusAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Trellis Default at Enabled Admin Privilege Learned Bridge MAC TableAdmin Privilege Adsl Configuration Admin Privilege RIP Configuration Admin Privilege Password Configuration Admin Privilege Miscellaneous ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Reset to Factory Default Admin Privilege Diagnostic TestChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Code Image Update Admin Privilege Network Code Image UpdateAdmin Privilege System Log Problems Starting Up the Adsl Router Problems with the WAN InterfaceProblems with the LAN Interface Problem Corrective ActionProblems Connecting to a Remote Node or ISP TroubleshootingPower Adapter Physical DimensionWeight Operating TemperatureConfiguration Default VC SettingPPP Service Scenario Bridge RFC RFC 1483 R PPPoA PPPoEPPP password ConfigurationEnd address Lease Time User mode Ethernet modeConfiguration Trellis WiringMisc Configuration WAN side Preferred DNSOn WAN access DMZ Host IPDhcp Relay Igmp proxySupport