Atlantis Land Network Router manual Dhcp Target IP Igmp Proxy Default at Disabled

Page 57

Chapter 3 Installation and Configuration

WAN side HTTP server: Default at Disabled.

FTP server: Default at Enabled.

TFTP server: Default at Disabled.

HTTP server port: Default at 80.

DMZ: Regarding the DMZ Host, it is a local computer exposed to the Internet. Therefore, an incoming packet will be checked by NAT algorithms in the ADSL Router, then passed to the DMZ host when the packet is not sent by hacker or not limited by the virtual server list.

DMZ HOST IP: Enter the IP address of the DMZ host.

DNS Proxy: Default at Enabled.

DHCP Relay: Default at Disabled

DHCP Target IP:

IGMP Proxy: Default at Disabled.

PPPreconnect on WAN access: Default at Disabled. Select Enabled if you want to automatically re- establish the PPPoE/PPPoA session when disconnected by ISP.

51

Image 57

Contents Fly Wireless Router Adsl Page Copyright Page Table of Contents Chapter Fly Wireless Router AdslIntroduction An Overview of I-Fly Wireless Router AdslAdsl Modem/Router Features Package ContentsLED Indicators Hardware IndicatorsFront Panel IntroductionRxD Rear Panel10/100 Link/ActSwitch ResetLineRJ11 JackPower on Hardware InstallationAdsl connection Connect Router to LANCabling Using Adsl Modem/RouterFly Wireless Router Adsl For Windows XP Installing the USB DriverFly Wireless Router Adsl Installation and Configuration Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl For Windows Me Fly Wireless Router Adsl For Windows Fly Wireless Router Adsl Configuring the Network Properties LAN Area Connection Status window, click Properties Click OK to finish the configuration For Windows Click OK to finish the configuration For Windows 95/98/Me Installation and Configuration For Windows NT4.0 Factory Default Settings PasswordLAN and WAN Port Addresses For BT VPI=0, VCI=38 and for KC VPI=1, VCI=50 Information from ISPConfiguring with Web Browser Fly Wireless Router Adsl Click Show Advanced settings Status HomeStatus Adsl Status Status LAN Configuration WAN ConfigurationSystem Wide Settings Encapsulation Service Category Select UBR or CBRConfiguration LAN Configuration Subnet Mask Default at Fly Wireless Router Adsl IP Address Default atConfiguration NAT Configuration Ethernet Mode SettingFly Wireless Router Adsl Configuration Virtual Server Configuration Configuration- Wireless Installation and Configuration Configuration Bridge Filtering Configuration Configuration DNS Configuration Admin Privilege WAN Status Configuration Save SettingsAdmin Privilege PPP Status Admin Privilege TCP Status Admin Privilege Route Table Admin Privilege Learned Bridge MAC Table Admin Privilege Adsl ConfigurationTrellis Default at Enabled Admin Privilege RIP Configuration Admin Privilege Miscellaneous Configuration Admin Privilege Password ConfigurationDhcp Target IP Igmp Proxy Default at Disabled Admin Privilege Diagnostic Test Admin Privilege Reset to Factory DefaultChecking LAN Connection Testing Ethernet LAN connection Test PPPoE connection Admin Privilege Network Code Image Update Admin Privilege Code Image UpdateAdmin Privilege System Log Problems with the WAN Interface Problems Starting Up the Adsl RouterProblems with the LAN Interface Problem Corrective ActionTroubleshooting Problems Connecting to a Remote Node or ISPPhysical Dimension Power AdapterWeight Operating TemperatureVC Setting Configuration DefaultPPP Service Scenario Bridge RFC RFC 1483 R PPPoA PPPoEConfiguration PPP passwordEnd address Lease Time User mode Ethernet modeWiring Configuration TrellisMisc Configuration WAN side Preferred DNSDMZ Host IP On WAN accessDhcp Relay Igmp proxySupport