SECTION 2 | INSTALLATION |
|
|
Static IP
If you are required to use a permanent IP address for connecting to the Internet, then select Static IP. Your ISP informs you if this is the connection to use.
1From Connection Mode, select Static IP.
2In the IP Address field, enter the IP Address supplied by your ISP.
3In the Subnet Mask field, enter the Subnet Mask supplied by your ISP.
4In the Default Gateway field, enter the values supplied by your ISP.
5In the Primary DNS field, enter the values supplied by your ISP. If necessary, enter secondary or tertiary DNS values into the Secondary or Third DNS fields.
6Click Apply to save the setting, or, if you wish to start over, click Cancel.
PPTP
Point to Point Tunneling Protocol (PPTP) is a service commonly found in Europe.
1From Connection Mode, select PPTP.
2In the PPP User Name field, enter the PPP User Name supplied by your ISP.
3In the PPP Password field, enter the PPP Password supplied by your ISP.
4In the PPTP Client IP field, enter the PPTP Client IP address supplied by your ISP.
5In the PPTP Server IP field, enter the PPTP Server IP address supplied by your ISP.
6Click Apply to save the setting, or, if you wish to start over, click Cancel.
SECTION 2, INSTALLATION |