Parameters that define customized
Label | Description |
cnx_profile_begin | Up to 5 different ranges for cnx_profile can be configured. |
phone | The first phone number of the range with this profile. It should not exceed 30 characters |
| and "none" specifies the null string. |
size_range | The number of phone numbers in the range with this profile. Values range from 1 to 255. |
| No label is equivalent to the value 0. |
cnx_type | Type of incoming call. Possible values are analog, digital, v110, v120 or a combination |
| of the four separated by the pipe, "". |
cnx_profile_end | ends definition of customized |
| FIG. 4.2 |
Parameters that define and apply to DSP profiles.
Label | Description |
dsp_profile_begin | Marks the beginning of a digital signal processor profile. All parameters following this |
| label apply only to this dsp profile until dsp_profile_end is reached. |
profile_id | A number between 1 and 5 which labels the dsp profile for later reference. |
config_string | Commands sent to the dsp. It should not exceed 80 characters. |
dsp_profile_end | Marks the end of the configuration parameters for a digital signal processor profile. See |
| comments for dsp_profile_begin above. |
| FIG. 4.3 DSP PROFILE PARAMETERS |
Chapter 4 Board and System Configuration | 16 |