Label | Description |
unit_name | Identifies the board. The parameter should not exceed 20 characters. |
prompt | Specifies the prompt to be used by the virtual console. It should not exceed 40 |
| characters. |
escape_char | Specifies the escape key to be used by the virtual console. It should not exceed one |
| character. If the value begins with 0x it is assumed to be in hexadecimal. The <ESC> key |
| has the value 0x1b. |
shortcut_char | Specifies the shortcut key to be used by the virtual console. It should not exceed one |
| character. If the value begins with 0x it is assumed to be in hexadecimal. The value 0x0 |
| turns this feature off. |
username | Defines the administrator's login name |
password | Sets the administrator's password |
syslog | Enables the system log and determines which messages will be displayed. The possible |
| values for each of the three parameters are disabled or enabled (first parameter), line, |
| debug, user, system, modem or a combination of them using “” (second parameter) and |
| sys, alert, critical, error, warning, normal, info or dbg (third parameter). A space |
| should appear between each of the three parameters, but not within a parameter. |
dsps_auto_restart | On occasion, the line requests that the DSP |
| load is not successful and the DSP must try many times. This parameter determines the |
| number of times the DSP may try to |
| (infinite number of retries) to 255. |
| FIG 4.1 GENERAL PARAMETERS |
Chapter 4 Board and System Configuration | 15 |