Cyclades PC400 installation manual Administrative Utilities

Page 32

Cyclades-PC400

Installation Manual

Administrative Utilities

A program called pc400util is used for administrative functions. It is executed by typing pc400util at the command line with the following options:

pc400util -<gpsSi-a<updown>> [-d device] [-f <filedefault>] [-t <MMDDYYYYHHMMSSsystem>]

The options are described in more detail in the list below:

-d device

defines the configuration device to use.

-f file

defines the file to be up/downloaded

-g

upload current board configuration to a local file.

-p

download configuration from a local file to the

 

board.

-s

get current statistics.

-S

get current status.

-i

get board information.

-a cmd

set the device administrative up or down.

-t time

set date and time on the board.

Chapter 5 Troubleshooting

32

Image 32
Contents Cyclades-PC400 Canadian DOC Notice Cyclades-PC400 Installation ManualFCC Warning Statement Table of Contents Appendix B Hardware Specifications What is in the BOX Upgrades of Software and ManualsStep Two Hardware InstallationStep One Step Three Step Four Step FiveSoftware Installation Software Installation Make config Make menuconfig Step TWO Board and System ConfigurationStep ONE Dspprofilebegin InterfnNbegin Label Description ISDN-PRI Profile Parameters Interface Parameters USA AT&T Last or channelnumberchannelnumberchannelnumber etc Pc400loadPc400util -p Step ThreeStep Four Step Five Guided Examples for the Most Common ApplicationsLAN ISDN-BRIParameter Description Value for T1 Value for E1 Line RAS DIAL-IN Application Parameters∙∙∙ ETH0 Example 2 a LAN-to-LAN Example Using ChannelsLAN 10 Multiple LAN-TO-LAN Application Parameters ∙∙∙ Troubleshooting General TipsHardware Test Root@cyclades common# ./pc400hwtestESC Previous Menu G Global E Errors Global TestPasses Pg0 Board DSP U19 U06 U20 U07Previous Menu G Global E Errors ESCAdministrative Utilities Users and Passwords Appendix a Information for Users not Familiar with LinuxPasswd Linux File StructureBasic File Manipulation Commands Cp filename destinationVi filename Mode What is done there How to Get ThereVi Editor Routing Table Netstat -rn Net-hostNetmask Ssh The Secure Shell SessionProcess Table PID TTY Stat Time CommandLoading the Configuration File Minute hour date month day-of-week user command Get information from the boardSyslog Crond Utility59 * * * * /etc/testcron.sh Dhcp Dynamic Host Configuration Protocol ClientActive root /etc/tstcron.src Packet Filtering using ipchains Accept Deny Interface isCyclades-PC400 Installation Manual Appendix B Hardware Specifications RJ-48C Signal Pin RxTip RxRing TxTip TxRingCyclades Philippines