Multi Tech Equipment MT5634ZBA-V-V92 Direct Connect Enable, Cisco Configuration, $Dn DTR Dialing

MultiModemZBA-V-V92 User Guide		4 AT Commands, S-Registers, & Result Codes
Command:	%Hn	Direct Connect Enable
Values:		n = 0, 1
Default:		0
Description:	%H0	Sets callback security to normal operation.
	%H1	All callback security calls will be direct connect regardless of
		whether the password or phone number has the - character.
Command:	%Rn	Cisco Configuration
Values:		n = 0, 1
Default:		0
Description:	%R0	Disables Cisco configuration.
	%R1	Sets E0, Q1, &D0, \N0, $SB9600, and %S1 for operation with
		a Cisco router.
Command:	%Sn	Command Speed Response
Values:		n = 0, 1
Default:		0
Description:	%S0	Sets modem to respond to AT commands at all normal speeds.
	%S1	AT commands accepted at 115200 bps only. AT commands at
		other speeds are ignored.
Command:	$Dn	DTR Dialing
Values:		n = 0 or 1
Default:		0
Description:	$D0	Disables DTR dialing.
	$D1	Dials the number in memory location 0 when DTR goes high.
Command:	$EBn	Asynchronous Word Length
Values:		n = 0 or 1
Default:		0
Description:	$EB0 Enables 10-bit mode.
	$EB1	Enables 11-bit mode.
Command:	$SBn	Serial Port Baud Rate
Values:		n = speed in bits per second
Default:		57600
Description: $SB300		Set serial port to 300 bps.
	$SB1200 Set serial port to 1200 bps.
	$SB2400 Set serial port to 2400 bps.

$SB4800	Set serial port to 4800 bps.
$SB9600	Set serial port to 9600 bps.
$SB19200	Set serial port to 19200 bps.
$SB38400	Set serial port to 38400 bps.
$SB57600	Set serial port to 57600 bps.
$SB115200	Set serial port to 115200 bps.

30