Multi Tech Equipment MT5634ZBA-V-V92 manual Command &Zy=+-x,???Store Dialing Command

MultiModemZBA-V-V92 User Guide		6 Callback Security
Command: &Zy=[+][-]x[,???]Store Dialing Command
Values:		y = 0–29 (callback security enabled)
		x = Dialing command string
Default:		None
Description:		Stores dialing command x in memory location y. The command
		string must begin with AT, and can have up to 35 characters.
		The telephone number in the command must be preceded by
		D, DT, or DP. Example: AT&Z0=+-ATM0D5551212,???.
		During a call, if the + or - character is not entered after the
		password, the modem will call back the stored number. This
		command can be used only after the setup password has been
		entered and callback security enabled.
Options:	+	Number entry. Enables the caller to enter a new callback number
		during password entry. The + character must be the first or
		second character in the command string.
	-	Direct connection. Enables the caller to choose a direct
		connection (no callback) during password entry. The - character
		must be the first or second character in the command string.
	,???	Extension entry. Enables the caller to enter an extension number
		during password entry. The + character must be the first or
		second character in the command string. The ? characters must
		follow a comma at the end of the string, and there must be one for
		each digit in the extension. If the ? characters are included in the
		dialing command, it is not possible for the caller to enter a new
		callback number, only an extension for the programmed
		callback number.
Command:	%Hn	Direct Connect Enable
Values:		n = 0, 1
Default:		0
Description:	%H0	Sets callback security to normal operation.
	%H1	All callback security calls will be direct connect regardless of
		whether the password or phone number has the - character.

65