STEP 3: CONNECTING THE SATELLITE IP MODEM TO YOUR PC
1.Place Satellite IP Modem outside on a flat surface with a clear view of the sky.
2.Power up Satellite IP Modem by pressing the Power button.
3.Choose one of the following options to connect your PC to the Satellite IP Modem:
USB
Ethernet
Bluetooth
IMPORTANT: You must disconnect any existing LAN connections on your PC before proceeding with installation. You must verify
that the proxy server settings in your browser are disabled. For Microsoft Internet Explorer, select Tools / Internet Options / Connections / LAN Settings and uncheck the box labelled 'Use a proxy server for your LAN'. For Netscape, go to Advanced Preferences and select 'Direct connection to the Internet'. When complete please close your browser. DO NOT FORGET YOU MAY NEED TO RECHECK THIS BOX ON RETURN TO YOUR OTHER INTERNET CONNECTION.
STEP 4: CONNECTING USING USB
1.Connect the white USB cable to your computer, and insert the other end of the connector into the Satellite IP Modem.
2.To check the active interface, press and hold the SELECT button for a few seconds. If the USB light flashes red then USB is already selected. If not, press the SELECT button once or twice as needed to change the selection to USB. After a short pause, the Satellite IP Modem will restart with the USB interface selected. If the Satellite IP Modem
is under battery power it will power down; press and hold power button to reapply power.
Note: When plugging in the USB cable for the first time, you will see Windows installing a new driver for the device.
8 |