Enable Antenna Pointing Display: This checkbox determines whether the Pointing Display comes up each time the Satellite IP Modem is booted. If the Modem is not moved between sessions, this option can be deselected to bypass the pointing state upon power up. However, if the Satellite IP Modem is moved, antenna pointing must be enabled to ensure optimum data throughput and performance.
Enable Antenna Pointing Audio Signal: This checkbox, associated with the Antenna Pointing display, enables or mutes audio through your computer speakers during pointing.
Switch GPS antenna: This radio button should be set to whatever type of GPS antenna is installed in your Satellite IP Modem, Internal or External. The External option should be selected only when using the optional external GPS antenna accessory.
;
Note
NEW FEATURE:
FIXED INSTALLATION
Fixed Installation: The Fixed Installation check box is for those Users that have their terminal installed in a fixed location and want to be able to leave it unattended. If this box is checked and the terminal receives an error message that requires a manual reboot of the terminal, the terminal will now automatically reboot on its own and bypass antenna pointing. This will allow the terminal to obtain a new connection with the satellite without any User intervention.
Select the Apply button to implement your modifications.
;
Note
Whenever you modify any settings on the Advanced Network Settings screen, you must exit the Control Pad, exit the Launch Pad, and power the Satellite IP Modem off and
33 |