Problem | Possible Cause | Action | |
|
|
| |
Satellite IP Modem | Modem/battery is | Let the Modem/battery cool down. Wait until the Indicator | |
stops sending data | overheated. | Lights stop blinking red to continue. | |
even with good |
|
| |
network |
|
| |
connection and |
|
| |
sufficiently |
|
| |
charged battery. |
|
| |
The indicator lights |
|
| |
blink red. |
|
| |
The Satellite IP | Antenna pointing | Turn the Modem off and on again to enter antenna pointing | |
Modem cannot | mode cannot be | mode. | |
enter antenna | accessed without |
| |
pointing mode | power cycling the |
| |
while you are | Modem. |
| |
trying to reposition |
|
| |
The Modem is | Go to the Advanced Network Settings page on the Control | ||
the antenna. | |||
configured to skip | Pad and check ‘Enable Antenna Pointing Display.’ | ||
| |||
| antenna pointing. |
| |
After Satellite IP | Normal behaviour. | There are several types of channels used by the Modem, | |
Modem exits |
| each with different signal strengths. Because the Signal | |
antenna pointing |
| Quality meter measures the channel currently in use, there | |
mode, the Signal |
| may be slight differences in what the meter shows as | |
Quality meter on |
| channels are changed from one type to another. | |
the Control Pad |
|
| |
changes from time |
|
| |
to time. |
|
| |
Antenna moves | The Satellite IP | Use | |
after pointing. | Modem was moved | place. | |
| by the wind. |
|
45 |