Telular SX7M, SX7T manual Using the USB Connection Option, Install the USB Drivers

Page 14

USB Connection Option

Using the USB Connection Option

The preferred method for establishing a data connection with the SX7 is through the Ethernet Port (see “Connect the SX7 to Your Computer” on page 5). However, you may also use the supplied USB cable instead of the Ethernet connection.

The USB connection uses Dial-Up Networking (DUN) to achieve Wireless WAN connectivity to the network. Before setting up a USB connection, you must install the SX7 USB Modem drivers from the CD that was packaged with your SX7.

Install the USB Drivers

1.Insert the CD into your computer’s CD drive.

2.Click Install USB Modem (or explore the CD contents and double-click SX7 Driver Installer.exe). (The installer will launch.)

3.Click Next. (The drivers will be installed.)

4.Click Finish.

Wi PATHTM SX7

12

User Guide

Image 14

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents YourWi PATHSX7 Components IntroductionGetting Started With the Wi Pathtm SX7 USB Cable a to B not pictured RJ-11 Phone CableSet Up Your SX7 TipTo power outlet Ground Connector Screw Power Up the SX7 Connect the SX7 to Your ComputerUsing the Telular Device Manager Connect to the Telular Device ManagerTelular Device Manager Overview Setting Up YourWireless WAN Data Connection For PSD Auto Connect, click Always On Data ConnectionThe Basics Status LEDs LED Reference TableUsing the USB Connection Option Install the USB DriversSet Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB CableUSB Connection Option USB Connection Option Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7TUsing the Fax Function on Your SX7T For MT Call Type 3 select FAX Next Call or FAX AlwaysPhone/Fax Pstn Settings Voice/Fax ProgrammingBasic Pots Setup LAN Features Setup OptionsSetup LAN Advanced Data Connection OptionsSetup Wireless WAN Dhcp SettingsSetup Keep Alive Setup Ddns Setup SIM Router NAT off Network OptionsNetwork Routing RIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZAdministration Options Admin ManagementAdmin Factory Defaults Admin Firmware UpgradeStatus Options Status RouterStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Pstn Basic Pstn Call ControlPstn Pots Setup Windows XP Advanced SettingsConfiguring TCP/IP Settings Glossary Line RingWiPATH SX7 Rear Panel View and Connectors SX7 Connections An Overview