Telular SX7T, SX7M manual Network Options, Network Routing, Router NAT off

Page 29

Advanced Data Connection Options

Network Options

Network > Routing

1

Routing settings allow you to control the unit’s network routing configuration. There are two primary options available, by selecting a Working Mode (1): Gateway (NAT on) and

Router (NAT off).

Gateway (NAT on): Select this option (above) only if you need to use a Network Access Translator (NAT) to alter IP packets as they pass through a router or firewall. The following options are available under this configuration:

● Static Routing: Select a Route Entry number (1–20).

● Destination IP: Enter a destination IP address for the selected Route Entry number.

● Subnet Mask: Enter a subnet mask for the selected Route Entry number.

● Default Gateway: Enter the IP address of the default gateway or router.

Repeat for as many Static Routing numbers you wish to set up. To see your currently configured routes, click Show Routing Table.

Wi PATHTM SX7

27

User Guide

Image 29

Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents Getting Started With the Wi Pathtm SX7 IntroductionYourWi PATHSX7 Components USB Cable a to B not pictured RJ-11 Phone CableTip Set Up Your SX7To power outlet Ground Connector Screw Connect the SX7 to Your Computer Power Up the SX7Connect to the Telular Device Manager Using the Telular Device ManagerTelular Device Manager Overview Setting Up YourWireless WAN Data Connection For PSD Auto Connect, click Always On Data ConnectionThe Basics LED Reference Table Status LEDsInstall the USB Drivers Using the USB Connection OptionConnect the SX7 to Your Computer With a USB Cable Set Up a Dial-Up Networking DUN ConnectionUSB Connection Option USB Connection Option Using the Voice Calling Features on Your SX7T Using the Voice and Fax Options SX7T OnlyFor MT Call Type 3 select FAX Next Call or FAX Always Using the Fax Function on Your SX7TPhone/Fax Voice/Fax Programming Pstn SettingsBasic Pots Setup Setup LAN Setup OptionsLAN Features Advanced Data Connection OptionsDhcp Settings Setup Wireless WANSetup Keep Alive Setup Ddns Setup SIM Router NAT off Network OptionsNetwork Routing RIP Version Select v1 or v2 default Network Firewall/Filters Network DMZ Network Port ForwardingAdmin Management Administration OptionsAdmin Firmware Upgrade Admin Factory DefaultsStatus Router Status OptionsStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Basic Pstn Call Control Pstn OptionsPstn Pots Setup Windows XP Advanced SettingsConfiguring TCP/IP Settings Line Ring GlossarySX7 Connections An Overview WiPATH SX7 Rear Panel View and Connectors