Telular SX7M, SX7T manual Phone/Fax

Voice and Fax Options (SX7T Only)

￿For RJ-11 Jack Mode (4) select J1 Voice, J2 FAX or J1 Voice, J2 Auto.

	4
5	6

￿ Click Save (5), and then click Restart (6) to save your settings and restart the SX7T.

2.Plug an RJ-11 cable into the Phone/Fax input on the back panel.

Phone/Fax

3.Connect the other end of the RJ-11 cable into your fax machine’s RJ-11 input jack.

4.If the fax machine has a handset, lift if off the receiver and listen for a dial tone. (Depending on your fax machine, you may also press TALK, ON, Hook, or Speaker.)

5.If you hear a dial tone, send a test fax to confirm your service is active.

Note

The SX7T is only compatible withGroup 3 (G3) faxmachinestransmittingat 7200or 9600bps/baud.

Pleaseconfirmyour SX7Tandfax machingsettingsbeforecallingyourserviceprovideror TelularTechSupport.

Wi PATHTM SX7 18 User Guide