Telular SX7M, SX7T manual Setup Keep Alive

Page 26

Advanced Data Connection Options

Setup > Keep Alive

Keep Alive lets you prevent the wireless network from closing your data connection during extended periods of inactivity by having the unit ping a DNS address at set intervals.

￿Keep Alive: Select Enable to enable this feature. Select Disable to allow your connection to terminate when the DHCP lease expires (usually 24 hours).

￿Ping Address: Select DNS1 to use the assigned address. To enter an alternate address, select User Defined and then enter a ping IP address in the User Defined Ping IP Address field that will appear.

￿Ping Interval: Select an interval for pinging. (Default is 120 seconds.)

Wi PATHTM SX7

24

User Guide

Image 26
Contents Wi Pathtm SX7T Terminal and SX7M Modem User Guide Table of Contents YourWi PATHSX7 Components IntroductionGetting Started With the Wi Pathtm SX7 USB Cable a to B not pictured RJ-11 Phone CableSet Up Your SX7 TipTo power outlet Ground Connector Screw Power Up the SX7 Connect the SX7 to Your ComputerUsing the Telular Device Manager Connect to the Telular Device ManagerTelular Device Manager Overview Setting Up YourWireless WAN Data Connection For PSD Auto Connect, click Always On Data ConnectionThe Basics Status LEDs LED Reference TableUsing the USB Connection Option Install the USB DriversSet Up a Dial-Up Networking DUN Connection Connect the SX7 to Your Computer With a USB CableUSB Connection Option USB Connection Option Using the Voice and Fax Options SX7T Only Using the Voice Calling Features on Your SX7TUsing the Fax Function on Your SX7T For MT Call Type 3 select FAX Next Call or FAX AlwaysPhone/Fax Pstn Settings Voice/Fax ProgrammingBasic Pots Setup LAN Features Setup OptionsSetup LAN Advanced Data Connection OptionsSetup Wireless WAN Dhcp SettingsSetup Keep Alive Setup Ddns Setup SIM Router NAT off Network OptionsNetwork Routing RIP Version Select v1 or v2 default Network Firewall/Filters Network Port Forwarding Network DMZAdministration Options Admin ManagementAdmin Factory Defaults Admin Firmware UpgradeStatus Options Status RouterStatus LAN Ethernet Status Status LAN USB Status Wireless WAN Status Pstn Options Pstn Basic Pstn Call ControlPstn Pots Setup Windows XP Advanced SettingsConfiguring TCP/IP Settings Glossary Line RingWiPATH SX7 Rear Panel View and Connectors SX7 Connections An Overview