Installation Overview
Before you begin using your card, you must install the card’s software and configure the card for your computer. The installation process consists of:
⬤Ensuring that your computer meets the system requirements.
⬤Inserting the card into your computer and installing the drivers for the card and the Sprint Connection Manager software (for Windows) or Watcher Lite software (for the Mac).
⬤Starting the software.
⬤Activating your Sprint account and configuring the card to use your account (unless the card has been preactivated).
Note:
To install the drivers and software, you do not need an installation CD. Your card uses the Sierra Wireless
System Requirements (Windows)
The Sprint Mobile Broadband card is supported on:
⬤Windows Vista.
⬤Windows XP with Service Pack 2.
⬤Windows 2000 with Service Pack 4 and high encryption support. (See “High Encryption Requirements (Windows)” on page 10.)
To install and run the card and accompanying Sprint Connection Manager software on a Windows computer, you will need the minimum system resources shown in the following table.
Slots | One ExpressCard/34 or ExpressCard/54 slot; alternatively, a |
| Type II PC Card slot (when used with the ExpressCard to |
| PC Card adapter [included in your package]). |
|
|
Memory | 32 MB |
|
|
Disk space | 32 MB |
|
|