Status Registers, Registers Dart | Sierra Wireless 300 specification

DART 300 Migration Guide

Comparative AT Command Reference

4.4. Status Registers

This section deals with the registers available on the two modems from the aspect of function only. Consult the specific model references for detailed descriptions of specific value ranges and meanings.

DART 200 registers used for Service Provider Mode are generally not shown as these are unsupported in the DART 300 and do not have equivalents. If an equivalent does exist, the register is shown in the table below.

4.4.1.S-Registers

Table 4-8:	S-Registers

Register	DART 200	DART 300

0	Auto-answer	Auto-answer
1	Telnet <CR><LF>	Not Supported.
2	Escape Character	Escape Character
3	Carriage Return Character	Not Supported. Fixed at 13 (0x0D)
4	Line Feed Character	Not Supported. Fixed at 10 (0x0A)
5	Back Space Character	Not Supported. Fixed at 8 (0x08)
		Note that the PAD editing feature has a
		backspace character in +WS73.
6	Delete Character	Not Supported.
7	ATA command connection establishment time-	TCP Handshake Timeout (default 30).
	out (default 60).	Also consult +WS198 Registration Wait Time
		Also consult +WS198 Registration Wait Time
12	Escape Guard Time (default 50)	Escape Guard Time (default 0)
13	Registration Timeout	Not supported. Registration timout is in
		register +WS198.
14	Bit Mapped Command Options (Read Only)	Bit Mapped Command Options (Read Only)
21	Bit Mapped Command Options (Read Only)	Bit Mapped Command Options (Read Only)
22	Bit Mapped Command Options (Read Only)	Not supported.
23	Bit Mapped Command Options (Read Only)	Not supported.
30	Channel Congested timer (Service Provider	PAD Inactivity Timeout
	Mode)	The DART 200 equivalent is S86
	The DART 300 does not have an equivalent.	The DART 200 equivalent is S86
	The DART 300 does not have an equivalent.
31	Spiral decrement for intra-area cell channel	Logic Sleep Enable
	search (Service Provider Mode)	The DART 200 does not have an equivalent.
	The DART 300 does not have an equivalent.	The DART 200 does not have an equivalent.
	The DART 300 does not have an equivalent.
50	PAD Data forwarding idle time-out.	Not supported. PAD Inter-character Timer is
		in register +WS70.
51	PAD Primary Forwarding Character 1	Not supported. PAD Primary Forwarding
		Character is in register +WS64.

2110291 Rev 1.0

Page 31