Sierra Wireless 300 manual WS-Registers in the Dart

DART 300 Migration Guide Comparative AT Command Reference

4.4.2.WS-Registers in the DART 300

This section provides a cross reference from the DART 300’s +WS register set to the equivalent DART 200 commands or registers.

Table 4-9:	WS-Registers
Register	DART 200 Equivalent	DART 300
45	*A for server side and T or P dial modifier for	PAD – Packet Service
	client side.
50	Not supported.	Normalized Signal Strength
56	S57 bit 0	Network Registration Status
60	Not supported.	Time Independent Escape Sequence (TIES)
62	Command F (Echo Data State).	PAD Local On-Line Echo
63	\M for bit 0 equivalence (enabling)	PAD Forwarding Character Feature Mask
	\F for bit 1 equivalence (inclusion)
64	S51 or S52; the DART 300 only supports one	PAD Primary Forwarding Character
	forwarding character.
70	S50 to set the timer.	PAD Inter-Character Timer
	\T to enable or disable use.
72	Not supported.	PAD Input Buffer Editing Enable
73	Not supported.	PAD Input Buffer Backspace Character
74	Not supported. Fixed at 1924.	PAD Maximum Packet Length
173	Registration Control	Registration Mode
	Supported via \R4 for auto-registration and
	\R2 for “manual” registration (automatic with
	dial). Settings can be queried at S57.
174	Supported with \N.	Channel Side A/B Preference
175	Not supported.	CDPD Sleep Idle Time
176	Supported using the \S command.	Auto-register NEI Index
179	Not supported.	Registration Wait Status
197	Supported using the \S command.	Active NEI Index
198	Supported in register S13.	Registration Wait Time
200	Supported in register S100.	Current Channel Number
201	Result codes are reported in S56.	Registration Progress and Result Codes
	Registration progress is reported in S126.
209	Not supported.	Radio Temperature
210	Supported in register S110.	Cell Number
212	Supported by command *L.	Listening Port
213	Not supported.	Friend List Index
217	Register S83 contains the timer.	UDP Server Receive Lock
	Bit 2 of S82 enables the feature.

2110291 Rev 1.0 Page 34